Hi,
There is a typo in your subject, please fix.
On 23/02/2017 at 10:32:58 +0200, Claudiu Beznea wrote:
> Add pwm controller bindings for sam5d2_xplained
> and enable it.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi | 4 ++++
> arch/arm/boot/dts/sama5d2.dtsi | 8 ++++++++
> 2 files changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi b/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi
> index 9fc270f..493ea29 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi
> +++ b/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi
> @@ -318,6 +318,10 @@
> };
> };
>
> + pwm0: pwm@f802c000 {
> + status = "okay";
> + };
> +
> flx0: flexcom@f8034000 {
> atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
> status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
> diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
> index cd459e8..e88785e 100644
> --- a/arch/arm/boot/dts/sama5d2.dtsi
> +++ b/arch/arm/boot/dts/sama5d2.dtsi
> @@ -1098,6 +1098,14 @@
> status = "disabled";
> };
>
> + pwm0: pwm@f802c000 {
> + compatible = "atmel,sama5d2-pwm";
This compatible is not documented and is not used in any driver. Is that
really working?
> + reg = <0xf802c000 0x4000>;
> + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>;
> + #pwm-cells = <3>;
> + clocks = <&pwm_clk>;
> + };
> +
> sfr: sfr@f8030000 {
> compatible = "atmel,sama5d2-sfr", "syscon";
> reg = <0xf8030000 0x98>;
> --
> 2.7.4
>
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
