On Tue, Feb 21, 2017 at 8:29 PM, Andreas Färber <afaerber@xxxxxxx> wrote: > Hello, > > This series adds initial support for the Marvell IAP140 SoC (aka PXA1908) > and the Andromeda Box Edge development board. > > v2 reuses ARCH_MMP. > > Both earlycon and serial are working, but an explicit console=ttyS0,115200n8 > is needed; with just "earlycon" and stdout-path the earlycon stops early and > switches to a tty0, long before disabling the bootconsole... > > All four CPUs come up, and an initrd can be reached. > > However, there are errors about CPUs 1-3 having a zero SYS_CNTFRQ_EL0: > > [ 0.095812] smp: Bringing up secondary CPUs ... > ======pxa1908_pmu_core_pwr_on: mpidr = 0x1 > ======pxa1908_pmu_core_pwr_on: mpidr = 0x2 > ======pxa1908_pmu_core_pwr_on: mpidr = 0x3 > [ 0.133419] Detected VIPT I-cache on CPU1 > [ 0.133430] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU1: 0x00000000000000 > [ 0.133447] Unsupported CPU feature variation. > ... > [ 0.133748] CPU1: Booted secondary processor [410fd032] > [ 0.165465] Detected VIPT I-cache on CPU2 > [ 0.165474] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU2: 0x00000000000000 > [ 0.165505] CPU2: Booted secondary processor [410fd032] > [ 0.197539] Detected VIPT I-cache on CPU3 > [ 0.197546] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU3: 0x00000000000000 > [ 0.197573] CPU3: Booted secondary processor [410fd032] > [ 0.197625] smp: Brought up 1 node, 4 CPUs > [ 0.522514] SMP: Total of 4 processors activated. > [ 0.527212] CPU features: detected feature: 32-bit EL0 Support > [ 0.533105] CPU: All CPU(s) started at EL2 > > KVM appears to initialize okay, but was not yet tested with guests. > > [ 0.865255] kvm [1]: 8-bit VMID > [ 0.868401] kvm [1]: IDMAP page: d23000 > [ 0.872233] kvm [1]: HYP VA range: 800000000000:ffffffffffff > [ 0.878262] kvm [1]: Hyp mode initialized successfully > [ 0.883429] kvm [1]: vgic-v2@d1dfc000 > [ 0.887179] kvm [1]: vgic interrupt IRQ1 > [ 0.891120] kvm [1]: virtual timer IRQ4 > > One limitation is currently the lack of an IAP140 clk driver. Patch 4/4 works > around that for UART0 with a fixed-clock. The PXA1928 clock driver should be close to what you need. They are supposed to be very similar. > A 3.14 based tree is available on GitHub acorn-marvell/brillo_pxa_kernel. > > Booting required changes to the vendor U-Boot, > cf. https://en.opensuse.org/HCL:AndromedaBoxEdge > > https://github.com/afaerber/linux/commits/edge-next > > Have a lot of fun! > > Cheers, > Andreas > > v1 -> v2: > * Add non-DT documentation > * Use ARCH_MMP instead of ARCH_PXA > * Split off Kconfig cleanups per subsystem > * Drop "mrvl,pxa-uart" and instead implement mmp earlycon > * Add some more DT nodes > > Cc: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx> > Cc: Gregory Clement <gregory.clement@xxxxxxxxxxxxxxxxxx> > Cc: info@xxxxxxxxxxxxxxxx > Cc: devicetree@xxxxxxxxxxxxxxx > > Andreas Färber (8): > Documentation: arm: Marvell: Document IAP140 > tty: serial: Suppress deprecated SERIAL_PXA on arm64 > tty: serial: 8250_pxa: Implement mmp earlycon You should not use the pxa serial driver. AFAICT, it was separate to add DMA support, but now the base 8250 driver supports DMA. The base 8250 driver works with the PXA1928 and should also work with the PXA1908. > sound: soc: pxa: Suppress SND_MMP_SOC for arm64 > ARM64: Prepare Marvell IAP140 aka PXA1908 > Documentation: devicetree: arm: marvell: Document IAP140 > ARM64: dts: marvell: Add IAP140 and Andromeda Box Edge > ARM64: dts: marvell: iap140-andromeda-box-edge: Add uart0 clock > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
