[PATCH v3 5/8] phy: phy-mt65xx-usb3: add support for new version phy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




There are some variations from mt2701 to mt2712:
1. banks shared by multiple ports are put back into each port,
    such as SPLLC and U2FREQ;
2. add a new bank MISC for u2port, and CHIP for u3port;
3. bank's offset in each port are also rearranged;

Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
 drivers/phy/phy-mt65xx-usb3.c |  344 ++++++++++++++++++++++++++---------------
 1 file changed, 217 insertions(+), 127 deletions(-)

diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
index f4a3505..eb33499 100644
--- a/drivers/phy/phy-mt65xx-usb3.c
+++ b/drivers/phy/phy-mt65xx-usb3.c
@@ -23,46 +23,54 @@
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
-/*
- * for sifslv2 register, but exclude port's;
- * relative to USB3_SIF2_BASE base address
- */
-#define SSUSB_SIFSLV_SPLLC		0x0000
-#define SSUSB_SIFSLV_U2FREQ		0x0100
-
-/* offsets of banks in each u2phy registers */
-#define SSUSB_SIFSLV_U2PHY_COM_BASE	0x0000
-/* offsets of banks in each u3phy registers */
-#define SSUSB_SIFSLV_U3PHYD_BASE	0x0000
-#define SSUSB_SIFSLV_U3PHYA_BASE	0x0200
-
-#define U3P_USBPHYACR0		(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0000)
+/* version V1 sub-banks offset base address */
+/* banks shared by multiple phys */
+#define SSUSB_SIFSLV_V1_SPLLC		0x000	/* shared by u3 phys */
+#define SSUSB_SIFSLV_V1_U2FREQ		0x100	/* shared by u2 phys */
+/* u2 phy bank */
+#define SSUSB_SIFSLV_V1_U2PHY_COM	0x000
+/* u3 phy banks */
+#define SSUSB_SIFSLV_V1_U3PHYD		0x000
+#define SSUSB_SIFSLV_V1_U3PHYA		0x200
+
+/* version V2 sub-banks offset base address */
+/* u2 phy banks */
+#define SSUSB_SIFSLV_V2_MISC		0x000
+#define SSUSB_SIFSLV_V2_U2FREQ		0x100
+#define SSUSB_SIFSLV_V2_U2PHY_COM	0x300
+/* u3 phy banks */
+#define SSUSB_SIFSLV_V2_SPLLC		0x000
+#define SSUSB_SIFSLV_V2_CHIP		0x100
+#define SSUSB_SIFSLV_V2_U3PHYD		0x200
+#define SSUSB_SIFSLV_V2_U3PHYA		0x400
+
+#define U3P_USBPHYACR0		0x000
 #define PA0_RG_U2PLL_FORCE_ON		BIT(15)
 
-#define U3P_USBPHYACR2		(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0008)
+#define U3P_USBPHYACR2		0x008
 #define PA2_RG_SIF_U2PLL_FORCE_EN	BIT(18)
 
-#define U3P_USBPHYACR5		(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0014)
+#define U3P_USBPHYACR5		0x014
 #define PA5_RG_U2_HSTX_SRCAL_EN	BIT(15)
 #define PA5_RG_U2_HSTX_SRCTRL		GENMASK(14, 12)
 #define PA5_RG_U2_HSTX_SRCTRL_VAL(x)	((0x7 & (x)) << 12)
 #define PA5_RG_U2_HS_100U_U3_EN	BIT(11)
 
-#define U3P_USBPHYACR6		(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0018)
+#define U3P_USBPHYACR6		0x018
 #define PA6_RG_U2_BC11_SW_EN		BIT(23)
 #define PA6_RG_U2_OTG_VBUSCMP_EN	BIT(20)
 #define PA6_RG_U2_SQTH		GENMASK(3, 0)
 #define PA6_RG_U2_SQTH_VAL(x)	(0xf & (x))
 
-#define U3P_U2PHYACR4		(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0020)
+#define U3P_U2PHYACR4		0x020
 #define P2C_RG_USB20_GPIO_CTL		BIT(9)
 #define P2C_USB20_GPIO_MODE		BIT(8)
 #define P2C_U2_GPIO_CTR_MSK	(P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
 
-#define U3D_U2PHYDCR0		(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0060)
+#define U3D_U2PHYDCR0		0x060
 #define P2C_RG_SIF_U2PLL_FORCE_ON	BIT(24)
 
-#define U3P_U2PHYDTM0		(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0068)
+#define U3P_U2PHYDTM0		0x068
 #define P2C_FORCE_UART_EN		BIT(26)
 #define P2C_FORCE_DATAIN		BIT(23)
 #define P2C_FORCE_DM_PULLDOWN		BIT(21)
@@ -84,59 +92,56 @@
 		P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \
 		P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
 
-#define U3P_U2PHYDTM1		(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x006C)
+#define U3P_U2PHYDTM1		0x06C
 #define P2C_RG_UART_EN			BIT(16)
 #define P2C_RG_VBUSVALID		BIT(5)
 #define P2C_RG_SESSEND			BIT(4)
 #define P2C_RG_AVALID			BIT(2)
 
-#define U3P_U3_PHYA_REG0	(SSUSB_SIFSLV_U3PHYA_BASE + 0x0000)
-#define P3A_RG_U3_VUSB10_ON		BIT(5)
-
-#define U3P_U3_PHYA_REG6	(SSUSB_SIFSLV_U3PHYA_BASE + 0x0018)
+#define U3P_U3_PHYA_REG6	0x018
 #define P3A_RG_TX_EIDLE_CM		GENMASK(31, 28)
 #define P3A_RG_TX_EIDLE_CM_VAL(x)	((0xf & (x)) << 28)
 
-#define U3P_U3_PHYA_REG9	(SSUSB_SIFSLV_U3PHYA_BASE + 0x0024)
+#define U3P_U3_PHYA_REG9	0x024
 #define P3A_RG_RX_DAC_MUX		GENMASK(5, 1)
 #define P3A_RG_RX_DAC_MUX_VAL(x)	((0x1f & (x)) << 1)
 
-#define U3P_U3PHYA_DA_REG0	(SSUSB_SIFSLV_U3PHYA_BASE + 0x0100)
+#define U3P_U3_PHYA_DA_REG0	0x100
 #define P3A_RG_XTAL_EXT_EN_U3		GENMASK(11, 10)
 #define P3A_RG_XTAL_EXT_EN_U3_VAL(x)	((0x3 & (x)) << 10)
 
-#define U3P_U3_PHYD_LFPS1		(SSUSB_SIFSLV_U3PHYD_BASE + 0x000c)
+#define U3P_U3_PHYD_LFPS1		0x00c
 #define P3D_RG_FWAKE_TH		GENMASK(21, 16)
 #define P3D_RG_FWAKE_TH_VAL(x)	((0x3f & (x)) << 16)
 
-#define U3P_PHYD_CDR1		(SSUSB_SIFSLV_U3PHYD_BASE + 0x005c)
+#define U3P_U3_PHYD_CDR1		0x05c
 #define P3D_RG_CDR_BIR_LTD1		GENMASK(28, 24)
 #define P3D_RG_CDR_BIR_LTD1_VAL(x)	((0x1f & (x)) << 24)
 #define P3D_RG_CDR_BIR_LTD0		GENMASK(12, 8)
 #define P3D_RG_CDR_BIR_LTD0_VAL(x)	((0x1f & (x)) << 8)
 
-#define U3P_U3_PHYD_RXDET1		(SSUSB_SIFSLV_U3PHYD_BASE + 0x128)
+#define U3P_U3_PHYD_RXDET1		0x128
 #define P3D_RG_RXDET_STB2_SET		GENMASK(17, 9)
 #define P3D_RG_RXDET_STB2_SET_VAL(x)	((0x1ff & (x)) << 9)
 
-#define U3P_U3_PHYD_RXDET2		(SSUSB_SIFSLV_U3PHYD_BASE + 0x12c)
+#define U3P_U3_PHYD_RXDET2		0x12c
 #define P3D_RG_RXDET_STB2_SET_P3	GENMASK(8, 0)
 #define P3D_RG_RXDET_STB2_SET_P3_VAL(x)	(0x1ff & (x))
 
-#define U3P_XTALCTL3		(SSUSB_SIFSLV_SPLLC + 0x0018)
+#define U3P_SPLLC_XTALCTL3		0x018
 #define XC3_RG_U3_XTAL_RX_PWD		BIT(9)
 #define XC3_RG_U3_FRC_XTAL_RX_PWD	BIT(8)
 
-#define U3P_U2FREQ_FMCR0	(SSUSB_SIFSLV_U2FREQ + 0x00)
+#define U3P_U2FREQ_FMCR0	0x00
 #define P2F_RG_MONCLK_SEL	GENMASK(27, 26)
 #define P2F_RG_MONCLK_SEL_VAL(x)	((0x3 & (x)) << 26)
 #define P2F_RG_FREQDET_EN	BIT(24)
 #define P2F_RG_CYCLECNT		GENMASK(23, 0)
 #define P2F_RG_CYCLECNT_VAL(x)	((P2F_RG_CYCLECNT) & (x))
 
-#define U3P_U2FREQ_VALUE	(SSUSB_SIFSLV_U2FREQ + 0x0c)
+#define U3P_U2FREQ_VALUE	0x0c
 
-#define U3P_U2FREQ_FMMONR1	(SSUSB_SIFSLV_U2FREQ + 0x10)
+#define U3P_U2FREQ_FMMONR1	0x10
 #define P2F_USB_FM_VALID	BIT(0)
 #define P2F_RG_FRCK_EN		BIT(8)
 
@@ -145,14 +150,37 @@
 #define U3P_SR_COEF_DIVISOR	1000
 #define U3P_FM_DET_CYCLE_CNT	1024
 
+enum mt_phy_version {
+	MT_PHY_V1 = 1,
+	MT_PHY_V2,
+};
+
 struct mt65xx_phy_pdata {
 	/* avoid RX sensitivity level degradation only for mt8173 */
 	bool avoid_rx_sen_degradation;
+	enum mt_phy_version version;
+};
+
+struct u2phy_banks {
+	void __iomem *misc;
+	void __iomem *fmreg;
+	void __iomem *com;
+};
+
+struct u3phy_banks {
+	void __iomem *spllc;
+	void __iomem *chip;
+	void __iomem *phyd; /* include u3phyd_bank2 */
+	void __iomem *phya; /* include u3phya_da */
 };
 
 struct mt65xx_phy_instance {
 	struct phy *phy;
 	void __iomem *port_base;
+	union {
+		struct u2phy_banks u2_banks;
+		struct u3phy_banks u3_banks;
+	};
 	struct clk *ref_clk;	/* reference clock of anolog phy */
 	u32 index;
 	u8 type;
@@ -169,49 +197,53 @@ struct mt65xx_u3phy {
 static void hs_slew_rate_calibrate(struct mt65xx_u3phy *u3phy,
 	struct mt65xx_phy_instance *instance)
 {
-	void __iomem *sif_base = u3phy->sif_base;
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	void __iomem *fmreg = u2_banks->fmreg;
+	void __iomem *com = u2_banks->com;
 	int calibration_val;
 	int fm_out;
 	u32 tmp;
 
 	/* enable USB ring oscillator */
-	tmp = readl(instance->port_base + U3P_USBPHYACR5);
+	tmp = readl(com + U3P_USBPHYACR5);
 	tmp |= PA5_RG_U2_HSTX_SRCAL_EN;
-	writel(tmp, instance->port_base + U3P_USBPHYACR5);
+	writel(tmp, com + U3P_USBPHYACR5);
 	udelay(1);
 
 	/*enable free run clock */
-	tmp = readl(sif_base + U3P_U2FREQ_FMMONR1);
+	tmp = readl(fmreg + U3P_U2FREQ_FMMONR1);
 	tmp |= P2F_RG_FRCK_EN;
-	writel(tmp, sif_base + U3P_U2FREQ_FMMONR1);
+	writel(tmp, fmreg + U3P_U2FREQ_FMMONR1);
 
 	/* set cycle count as 1024, and select u2 channel */
-	tmp = readl(sif_base + U3P_U2FREQ_FMCR0);
+	tmp = readl(fmreg + U3P_U2FREQ_FMCR0);
 	tmp &= ~(P2F_RG_CYCLECNT | P2F_RG_MONCLK_SEL);
 	tmp |= P2F_RG_CYCLECNT_VAL(U3P_FM_DET_CYCLE_CNT);
-	tmp |= P2F_RG_MONCLK_SEL_VAL(instance->index >> 1);
-	writel(tmp, sif_base + U3P_U2FREQ_FMCR0);
+	if (u3phy->pdata->version == MT_PHY_V1)
+		tmp |= P2F_RG_MONCLK_SEL_VAL(instance->index >> 1);
+
+	writel(tmp, fmreg + U3P_U2FREQ_FMCR0);
 
 	/* enable frequency meter */
-	tmp = readl(sif_base + U3P_U2FREQ_FMCR0);
+	tmp = readl(fmreg + U3P_U2FREQ_FMCR0);
 	tmp |= P2F_RG_FREQDET_EN;
-	writel(tmp, sif_base + U3P_U2FREQ_FMCR0);
+	writel(tmp, fmreg + U3P_U2FREQ_FMCR0);
 
 	/* ignore return value */
-	readl_poll_timeout(sif_base + U3P_U2FREQ_FMMONR1, tmp,
+	readl_poll_timeout(fmreg + U3P_U2FREQ_FMMONR1, tmp,
 		  (tmp & P2F_USB_FM_VALID), 10, 200);
 
-	fm_out = readl(sif_base + U3P_U2FREQ_VALUE);
+	fm_out = readl(fmreg + U3P_U2FREQ_VALUE);
 
 	/* disable frequency meter */
-	tmp = readl(sif_base + U3P_U2FREQ_FMCR0);
+	tmp = readl(fmreg + U3P_U2FREQ_FMCR0);
 	tmp &= ~P2F_RG_FREQDET_EN;
-	writel(tmp, sif_base + U3P_U2FREQ_FMCR0);
+	writel(tmp, fmreg + U3P_U2FREQ_FMCR0);
 
 	/*disable free run clock */
-	tmp = readl(sif_base + U3P_U2FREQ_FMMONR1);
+	tmp = readl(fmreg + U3P_U2FREQ_FMMONR1);
 	tmp &= ~P2F_RG_FRCK_EN;
-	writel(tmp, sif_base + U3P_U2FREQ_FMMONR1);
+	writel(tmp, fmreg + U3P_U2FREQ_FMMONR1);
 
 	if (fm_out) {
 		/* ( 1024 / FM_OUT ) x reference clock frequency x 0.028 */
@@ -226,63 +258,63 @@ static void hs_slew_rate_calibrate(struct mt65xx_u3phy *u3phy,
 		instance->index, fm_out, calibration_val);
 
 	/* set HS slew rate */
-	tmp = readl(instance->port_base + U3P_USBPHYACR5);
+	tmp = readl(com + U3P_USBPHYACR5);
 	tmp &= ~PA5_RG_U2_HSTX_SRCTRL;
 	tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(calibration_val);
-	writel(tmp, instance->port_base + U3P_USBPHYACR5);
+	writel(tmp, com + U3P_USBPHYACR5);
 
 	/* disable USB ring oscillator */
-	tmp = readl(instance->port_base + U3P_USBPHYACR5);
+	tmp = readl(com + U3P_USBPHYACR5);
 	tmp &= ~PA5_RG_U2_HSTX_SRCAL_EN;
-	writel(tmp, instance->port_base + U3P_USBPHYACR5);
+	writel(tmp, com + U3P_USBPHYACR5);
 }
 
 static void u3_phy_instance_init(struct mt65xx_u3phy *u3phy,
 	struct mt65xx_phy_instance *instance)
 {
-	void __iomem *port_base = instance->port_base;
+	struct u3phy_banks *u3_banks = &instance->u3_banks;
 	u32 tmp;
 
 	/* gating PCIe Analog XTAL clock */
-	tmp = readl(u3phy->sif_base + U3P_XTALCTL3);
+	tmp = readl(u3_banks->spllc + U3P_SPLLC_XTALCTL3);
 	tmp |= XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD;
-	writel(tmp, u3phy->sif_base + U3P_XTALCTL3);
+	writel(tmp, u3_banks->spllc + U3P_SPLLC_XTALCTL3);
 
 	/* gating XSQ */
-	tmp = readl(port_base + U3P_U3PHYA_DA_REG0);
+	tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG0);
 	tmp &= ~P3A_RG_XTAL_EXT_EN_U3;
 	tmp |= P3A_RG_XTAL_EXT_EN_U3_VAL(2);
-	writel(tmp, port_base + U3P_U3PHYA_DA_REG0);
+	writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG0);
 
-	tmp = readl(port_base + U3P_U3_PHYA_REG9);
+	tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG9);
 	tmp &= ~P3A_RG_RX_DAC_MUX;
 	tmp |= P3A_RG_RX_DAC_MUX_VAL(4);
-	writel(tmp, port_base + U3P_U3_PHYA_REG9);
+	writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG9);
 
-	tmp = readl(port_base + U3P_U3_PHYA_REG6);
+	tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG6);
 	tmp &= ~P3A_RG_TX_EIDLE_CM;
 	tmp |= P3A_RG_TX_EIDLE_CM_VAL(0xe);
-	writel(tmp, port_base + U3P_U3_PHYA_REG6);
+	writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG6);
 
-	tmp = readl(port_base + U3P_PHYD_CDR1);
+	tmp = readl(u3_banks->phyd + U3P_U3_PHYD_CDR1);
 	tmp &= ~(P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1);
 	tmp |= P3D_RG_CDR_BIR_LTD0_VAL(0xc) | P3D_RG_CDR_BIR_LTD1_VAL(0x3);
-	writel(tmp, port_base + U3P_PHYD_CDR1);
+	writel(tmp, u3_banks->phyd + U3P_U3_PHYD_CDR1);
 
-	tmp = readl(port_base + U3P_U3_PHYD_LFPS1);
+	tmp = readl(u3_banks->phyd + U3P_U3_PHYD_LFPS1);
 	tmp &= ~P3D_RG_FWAKE_TH;
 	tmp |= P3D_RG_FWAKE_TH_VAL(0x34);
-	writel(tmp, port_base + U3P_U3_PHYD_LFPS1);
+	writel(tmp, u3_banks->phyd + U3P_U3_PHYD_LFPS1);
 
-	tmp = readl(port_base + U3P_U3_PHYD_RXDET1);
+	tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET1);
 	tmp &= ~P3D_RG_RXDET_STB2_SET;
 	tmp |= P3D_RG_RXDET_STB2_SET_VAL(0x10);
-	writel(tmp, port_base + U3P_U3_PHYD_RXDET1);
+	writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET1);
 
-	tmp = readl(port_base + U3P_U3_PHYD_RXDET2);
+	tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET2);
 	tmp &= ~P3D_RG_RXDET_STB2_SET_P3;
 	tmp |= P3D_RG_RXDET_STB2_SET_P3_VAL(0x10);
-	writel(tmp, port_base + U3P_U3_PHYD_RXDET2);
+	writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET2);
 
 	dev_dbg(u3phy->dev, "%s(%d)\n", __func__, instance->index);
 }
@@ -290,51 +322,52 @@ static void u3_phy_instance_init(struct mt65xx_u3phy *u3phy,
 static void phy_instance_init(struct mt65xx_u3phy *u3phy,
 	struct mt65xx_phy_instance *instance)
 {
-	void __iomem *port_base = instance->port_base;
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	void __iomem *com = u2_banks->com;
 	u32 index = instance->index;
 	u32 tmp;
 
 	/* switch to USB function. (system register, force ip into usb mode) */
-	tmp = readl(port_base + U3P_U2PHYDTM0);
+	tmp = readl(com + U3P_U2PHYDTM0);
 	tmp &= ~P2C_FORCE_UART_EN;
 	tmp |= P2C_RG_XCVRSEL_VAL(1) | P2C_RG_DATAIN_VAL(0);
-	writel(tmp, port_base + U3P_U2PHYDTM0);
+	writel(tmp, com + U3P_U2PHYDTM0);
 
-	tmp = readl(port_base + U3P_U2PHYDTM1);
+	tmp = readl(com + U3P_U2PHYDTM1);
 	tmp &= ~P2C_RG_UART_EN;
-	writel(tmp, port_base + U3P_U2PHYDTM1);
+	writel(tmp, com + U3P_U2PHYDTM1);
 
 	if (!index) {
-		tmp = readl(port_base + U3P_U2PHYACR4);
+		tmp = readl(com + U3P_U2PHYACR4);
 		tmp &= ~P2C_U2_GPIO_CTR_MSK;
-		writel(tmp, port_base + U3P_U2PHYACR4);
+		writel(tmp, com + U3P_U2PHYACR4);
 	}
 
 	if (u3phy->pdata->avoid_rx_sen_degradation) {
 		if (!index) {
-			tmp = readl(port_base + U3P_USBPHYACR2);
+			tmp = readl(com + U3P_USBPHYACR2);
 			tmp |= PA2_RG_SIF_U2PLL_FORCE_EN;
-			writel(tmp, port_base + U3P_USBPHYACR2);
+			writel(tmp, com + U3P_USBPHYACR2);
 
-			tmp = readl(port_base + U3D_U2PHYDCR0);
+			tmp = readl(com + U3D_U2PHYDCR0);
 			tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
-			writel(tmp, port_base + U3D_U2PHYDCR0);
+			writel(tmp, com + U3D_U2PHYDCR0);
 		} else {
-			tmp = readl(port_base + U3D_U2PHYDCR0);
+			tmp = readl(com + U3D_U2PHYDCR0);
 			tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
-			writel(tmp, port_base + U3D_U2PHYDCR0);
+			writel(tmp, com + U3D_U2PHYDCR0);
 
-			tmp = readl(port_base + U3P_U2PHYDTM0);
+			tmp = readl(com + U3P_U2PHYDTM0);
 			tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM;
-			writel(tmp, port_base + U3P_U2PHYDTM0);
+			writel(tmp, com + U3P_U2PHYDTM0);
 		}
 	}
 
-	tmp = readl(port_base + U3P_USBPHYACR6);
+	tmp = readl(com + U3P_USBPHYACR6);
 	tmp &= ~PA6_RG_U2_BC11_SW_EN;	/* DP/DM BC1.1 path Disable */
 	tmp &= ~PA6_RG_U2_SQTH;
 	tmp |= PA6_RG_U2_SQTH_VAL(2);
-	writel(tmp, port_base + U3P_USBPHYACR6);
+	writel(tmp, com + U3P_USBPHYACR6);
 
 	dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
 }
@@ -342,41 +375,42 @@ static void phy_instance_init(struct mt65xx_u3phy *u3phy,
 static void phy_instance_power_on(struct mt65xx_u3phy *u3phy,
 	struct mt65xx_phy_instance *instance)
 {
-	void __iomem *port_base = instance->port_base;
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	void __iomem *com = u2_banks->com;
 	u32 index = instance->index;
 	u32 tmp;
 
 	/* (force_suspendm=0) (let suspendm=1, enable usb 480MHz pll) */
-	tmp = readl(port_base + U3P_U2PHYDTM0);
+	tmp = readl(com + U3P_U2PHYDTM0);
 	tmp &= ~(P2C_FORCE_SUSPENDM | P2C_RG_XCVRSEL);
 	tmp &= ~(P2C_RG_DATAIN | P2C_DTM0_PART_MASK);
-	writel(tmp, port_base + U3P_U2PHYDTM0);
+	writel(tmp, com + U3P_U2PHYDTM0);
 
 	/* OTG Enable */
-	tmp = readl(port_base + U3P_USBPHYACR6);
+	tmp = readl(com + U3P_USBPHYACR6);
 	tmp |= PA6_RG_U2_OTG_VBUSCMP_EN;
-	writel(tmp, port_base + U3P_USBPHYACR6);
+	writel(tmp, com + U3P_USBPHYACR6);
 
 	if (!index) {
 		/* switch 100uA current to SSUSB */
-		tmp = readl(port_base + U3P_USBPHYACR5);
+		tmp = readl(com + U3P_USBPHYACR5);
 		tmp |= PA5_RG_U2_HS_100U_U3_EN;
-		writel(tmp, port_base + U3P_USBPHYACR5);
+		writel(tmp, com + U3P_USBPHYACR5);
 	}
 
-	tmp = readl(port_base + U3P_U2PHYDTM1);
+	tmp = readl(com + U3P_U2PHYDTM1);
 	tmp |= P2C_RG_VBUSVALID | P2C_RG_AVALID;
 	tmp &= ~P2C_RG_SESSEND;
-	writel(tmp, port_base + U3P_U2PHYDTM1);
+	writel(tmp, com + U3P_U2PHYDTM1);
 
 	if (u3phy->pdata->avoid_rx_sen_degradation && index) {
-		tmp = readl(port_base + U3D_U2PHYDCR0);
+		tmp = readl(com + U3D_U2PHYDCR0);
 		tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
-		writel(tmp, port_base + U3D_U2PHYDCR0);
+		writel(tmp, com + U3D_U2PHYDCR0);
 
-		tmp = readl(port_base + U3P_U2PHYDTM0);
+		tmp = readl(com + U3P_U2PHYDTM0);
 		tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM;
-		writel(tmp, port_base + U3P_U2PHYDTM0);
+		writel(tmp, com + U3P_U2PHYDTM0);
 	}
 	dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
 }
@@ -384,42 +418,43 @@ static void phy_instance_power_on(struct mt65xx_u3phy *u3phy,
 static void phy_instance_power_off(struct mt65xx_u3phy *u3phy,
 	struct mt65xx_phy_instance *instance)
 {
-	void __iomem *port_base = instance->port_base;
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	void __iomem *com = u2_banks->com;
 	u32 index = instance->index;
 	u32 tmp;
 
-	tmp = readl(port_base + U3P_U2PHYDTM0);
+	tmp = readl(com + U3P_U2PHYDTM0);
 	tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN);
 	tmp |= P2C_FORCE_SUSPENDM;
-	writel(tmp, port_base + U3P_U2PHYDTM0);
+	writel(tmp, com + U3P_U2PHYDTM0);
 
 	/* OTG Disable */
-	tmp = readl(port_base + U3P_USBPHYACR6);
+	tmp = readl(com + U3P_USBPHYACR6);
 	tmp &= ~PA6_RG_U2_OTG_VBUSCMP_EN;
-	writel(tmp, port_base + U3P_USBPHYACR6);
+	writel(tmp, com + U3P_USBPHYACR6);
 
 	if (!index) {
 		/* switch 100uA current back to USB2.0 */
-		tmp = readl(port_base + U3P_USBPHYACR5);
+		tmp = readl(com + U3P_USBPHYACR5);
 		tmp &= ~PA5_RG_U2_HS_100U_U3_EN;
-		writel(tmp, port_base + U3P_USBPHYACR5);
+		writel(tmp, com + U3P_USBPHYACR5);
 	}
 
 	/* let suspendm=0, set utmi into analog power down */
-	tmp = readl(port_base + U3P_U2PHYDTM0);
+	tmp = readl(com + U3P_U2PHYDTM0);
 	tmp &= ~P2C_RG_SUSPENDM;
-	writel(tmp, port_base + U3P_U2PHYDTM0);
+	writel(tmp, com + U3P_U2PHYDTM0);
 	udelay(1);
 
-	tmp = readl(port_base + U3P_U2PHYDTM1);
+	tmp = readl(com + U3P_U2PHYDTM1);
 	tmp &= ~(P2C_RG_VBUSVALID | P2C_RG_AVALID);
 	tmp |= P2C_RG_SESSEND;
-	writel(tmp, port_base + U3P_U2PHYDTM1);
+	writel(tmp, com + U3P_U2PHYDTM1);
 
 	if (u3phy->pdata->avoid_rx_sen_degradation && index) {
-		tmp = readl(port_base + U3D_U2PHYDCR0);
+		tmp = readl(com + U3D_U2PHYDCR0);
 		tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
-		writel(tmp, port_base + U3D_U2PHYDCR0);
+		writel(tmp, com + U3D_U2PHYDCR0);
 	}
 
 	dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
@@ -428,18 +463,55 @@ static void phy_instance_power_off(struct mt65xx_u3phy *u3phy,
 static void phy_instance_exit(struct mt65xx_u3phy *u3phy,
 	struct mt65xx_phy_instance *instance)
 {
-	void __iomem *port_base = instance->port_base;
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	void __iomem *com = u2_banks->com;
 	u32 index = instance->index;
 	u32 tmp;
 
 	if (u3phy->pdata->avoid_rx_sen_degradation && index) {
-		tmp = readl(port_base + U3D_U2PHYDCR0);
+		tmp = readl(com + U3D_U2PHYDCR0);
 		tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
-		writel(tmp, port_base + U3D_U2PHYDCR0);
+		writel(tmp, com + U3D_U2PHYDCR0);
 
-		tmp = readl(port_base + U3P_U2PHYDTM0);
+		tmp = readl(com + U3P_U2PHYDTM0);
 		tmp &= ~P2C_FORCE_SUSPENDM;
-		writel(tmp, port_base + U3P_U2PHYDTM0);
+		writel(tmp, com + U3P_U2PHYDTM0);
+	}
+}
+
+static void phy_v1_banks_init(struct mt65xx_u3phy *u3phy,
+	struct mt65xx_phy_instance *instance)
+{
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	struct u3phy_banks *u3_banks = &instance->u3_banks;
+
+	if (instance->type == PHY_TYPE_USB2) {
+		u2_banks->misc = NULL;
+		u2_banks->fmreg = u3phy->sif_base + SSUSB_SIFSLV_V1_U2FREQ;
+		u2_banks->com = instance->port_base + SSUSB_SIFSLV_V1_U2PHY_COM;
+	} else if (instance->type == PHY_TYPE_USB3) {
+		u3_banks->spllc = u3phy->sif_base + SSUSB_SIFSLV_V1_SPLLC;
+		u3_banks->chip = NULL;
+		u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
+		u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA;
+	}
+}
+
+static void phy_v2_banks_init(struct mt65xx_u3phy *u3phy,
+	struct mt65xx_phy_instance *instance)
+{
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	struct u3phy_banks *u3_banks = &instance->u3_banks;
+
+	if (instance->type == PHY_TYPE_USB2) {
+		u2_banks->misc = instance->port_base + SSUSB_SIFSLV_V2_MISC;
+		u2_banks->fmreg = instance->port_base + SSUSB_SIFSLV_V2_U2FREQ;
+		u2_banks->com = instance->port_base + SSUSB_SIFSLV_V2_U2PHY_COM;
+	} else if (instance->type == PHY_TYPE_USB3) {
+		u3_banks->spllc = instance->port_base + SSUSB_SIFSLV_V2_SPLLC;
+		u3_banks->chip = instance->port_base + SSUSB_SIFSLV_V2_CHIP;
+		u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V2_U3PHYD;
+		u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V2_U3PHYA;
 	}
 }
 
@@ -506,7 +578,6 @@ static struct phy *mt65xx_phy_xlate(struct device *dev,
 	struct device_node *phy_np = args->np;
 	int index;
 
-
 	if (args->args_count != 1) {
 		dev_err(dev, "invalid number of cells in 'phy' property\n");
 		return ERR_PTR(-EINVAL);
@@ -524,13 +595,21 @@ static struct phy *mt65xx_phy_xlate(struct device *dev,
 	}
 
 	instance->type = args->args[0];
-
 	if (!(instance->type == PHY_TYPE_USB2 ||
 	      instance->type == PHY_TYPE_USB3)) {
 		dev_err(dev, "unsupported device type: %d\n", instance->type);
 		return ERR_PTR(-EINVAL);
 	}
 
+	if (u3phy->pdata->version == MT_PHY_V1) {
+		phy_v1_banks_init(u3phy, instance);
+	} else if (u3phy->pdata->version == MT_PHY_V2) {
+		phy_v2_banks_init(u3phy, instance);
+	} else {
+		dev_err(dev, "phy version is not supported\n");
+		return ERR_PTR(-EINVAL);
+	}
+
 	return instance->phy;
 }
 
@@ -544,14 +623,22 @@ static struct phy *mt65xx_phy_xlate(struct device *dev,
 
 static const struct mt65xx_phy_pdata mt2701_pdata = {
 	.avoid_rx_sen_degradation = false,
+	.version = MT_PHY_V1,
+};
+
+static const struct mt65xx_phy_pdata mt2712_pdata = {
+	.avoid_rx_sen_degradation = false,
+	.version = MT_PHY_V2,
 };
 
 static const struct mt65xx_phy_pdata mt8173_pdata = {
 	.avoid_rx_sen_degradation = true,
+	.version = MT_PHY_V1,
 };
 
 static const struct of_device_id mt65xx_u3phy_id_table[] = {
 	{ .compatible = "mediatek,mt2701-u3phy", .data = &mt2701_pdata },
+	{ .compatible = "mediatek,mt2712-u3phy", .data = &mt2712_pdata },
 	{ .compatible = "mediatek,mt8173-u3phy", .data = &mt8173_pdata },
 	{ },
 };
@@ -587,11 +674,14 @@ static int mt65xx_u3phy_probe(struct platform_device *pdev)
 	u3phy->dev = dev;
 	platform_set_drvdata(pdev, u3phy);
 
-	sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	u3phy->sif_base = devm_ioremap_resource(dev, sif_res);
-	if (IS_ERR(u3phy->sif_base)) {
-		dev_err(dev, "failed to remap sif regs\n");
-		return PTR_ERR(u3phy->sif_base);
+	if (u3phy->pdata->version == MT_PHY_V1) {
+		/* get banks shared by multiple phys */
+		sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		u3phy->sif_base = devm_ioremap_resource(dev, sif_res);
+		if (IS_ERR(u3phy->sif_base)) {
+			dev_err(dev, "failed to remap sif regs\n");
+			return PTR_ERR(u3phy->sif_base);
+		}
 	}
 
 	port = 0;
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux