Re: [PATCH v9 1/2] Add OV5647 device tree documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Vladimir,

Thank you for your feedback

On 2/21/2017 3:58 PM, Vladimir Zapolskiy wrote:
> Hi Ramiro,
> 
> On 02/17/2017 03:14 PM, Ramiro Oliveira wrote:
>> Create device tree bindings documentation.
>>
>> Signed-off-by: Ramiro Oliveira <roliveir@xxxxxxxxxxxx>
>> Acked-by: Rob Herring <robh@xxxxxxxxxx>
>> ---
>>  .../devicetree/bindings/media/i2c/ov5647.txt       | 35 ++++++++++++++++++++++
>>  1 file changed, 35 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5647.txt
>>
>> diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt
>> new file mode 100644
>> index 000000000000..31956426d3b9
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt
>> @@ -0,0 +1,35 @@
>> +Omnivision OV5647 raw image sensor
>> +---------------------------------
>> +
>> +OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
>> +and CCI (I2C compatible) control bus.
>> +
>> +Required properties:
>> +
>> +- compatible		: "ovti,ov5647".
>> +- reg			: I2C slave address of the sensor.
>> +- clocks		: Reference to the xclk clock.
> 
> Is "xclk" clock a pixel clock or something else?
> 

It's an external oscillator.

>> +- clock-names		: Should be "xclk".
> 
> You can remove this property, because there is only one source clock.
> 

Ok.

>> +- clock-frequency	: Frequency of the xclk clock.
> 
> And after the last updates in the driver this property can be removed as well.
> 

But I'm still using clk_get_rate in the driver, if I remove the frequency here
the probing will fail.

>> +
>> +The common video interfaces bindings (see video-interfaces.txt) should be
>> +used to specify link to the image data receiver. The OV5647 device
>> +node should contain one 'port' child node with an 'endpoint' subnode.
>> +
>> +Example:
>> +
>> +	i2c@2000 {
>> +		...
>> +		ov: camera@36 {
>> +			compatible = "ovti,ov5647";
>> +			reg = <0x36>;
>> +			clocks = <&camera_clk>;
>> +			clock-names = "xclk";
>> +			clock-frequency = <25000000>;
> 
> When you remove two unused properties, please don't forget to update the
> example.
> 

Ok.

>> +			port {
>> +				camera_1: endpoint {
>> +					remote-endpoint = <&csi1_ep1>;
>> +				};
>> +			};
>> +		};
>> +	};
>>
> 
> --
> With best wishes,
> Vladimir
> 

-- 
Best Regards

Ramiro Oliveira
Ramiro.Oliveira@xxxxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux