On Mon, Feb 20, 2017 at 5:11 PM, Fabio Estevam <festevam@xxxxxxxxx> wrote:
> On Mon, Feb 20, 2017 at 5:05 PM, Jagan Teki <jagan@xxxxxxxxxxxx> wrote:
>
>> +&ldb {
>> + status = "okay";
>> +
>> + lvds-channel@0 {
>> + fsl,data-mapping = "spwg";
>> + fsl,data-width = <24>;
>> + status = "okay";
>> +
>> + display-timings {
>> + native-mode = <&timing1>;
>> + timing1: hsd100pxn1 {
>> + clock-frequency = <60000000>;
>> + hactive = <1280>;
>> + vactive = <800>;
>> + hback-porch = <40>;
>> + hfront-porch = <40>;
>> + vback-porch = <10>;
>> + vfront-porch = <3>;
>> + hsync-len = <80>;
>> + vsync-len = <10>;
>
> hsd100pxn1 is supported by the drm simple panel driver.
>
> This allows you to remove the display-timings from the dts and use
> compatible = "hannstar,hsd100pxn1" instead.
After looking at the timings you provided they do not match with the
timings from hsd100pxn1, so it seems you have a different panel on
this board.
If this is the case, then you should not put a 'hsd100pxn1' reference
in the dts.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
