Hey Stefan,
On Sun, Feb 19, 2017 at 01:31:49PM +0100, Stefan Wahren wrote:
> Hi Eduardo,
>
> > Eduardo Valentin <edubezval@xxxxxxxxx> hat am 19. Februar 2017 um 02:17 geschrieben:
> >
> >
> > On Sun, Feb 12, 2017 at 07:38:48PM +0000, Stefan Wahren wrote:
> > > As suggested by Eduardo Valentin this adds the thermal zone for
> > > the bcm2835 SoC with its single thermal sensor. We start with
> > > the criticial trip point and leave the cooling devices empty
> > > since we don't have any at the moment.
> > >
> > > Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
> > > ---
> > >
> > > Changes in V2:
> > > - add missing thermal-sensor-cells property
> > > - change gpu-thermal to cpu-thermal
> > >
> > > arch/arm/boot/dts/bcm283x.dtsi | 20 ++++++++++++++++++++
> > > 1 file changed, 20 insertions(+)
> > >
> > > diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
> > > index a3106aa..4dc74f6 100644
> > > --- a/arch/arm/boot/dts/bcm283x.dtsi
> > > +++ b/arch/arm/boot/dts/bcm283x.dtsi
> > > @@ -19,6 +19,25 @@
> > > bootargs = "earlyprintk console=ttyAMA0";
> > > };
> > >
> > > + thermal-zones {
> > > + cpu_thermal: cpu-thermal {
> > > + polling-delay-passive = <0>;
> > > + polling-delay = <1000>;
> > > +
> >
> > Check the diff I sent and also add the following for differentiating the
> > offsets and slopes depending on which chip the zone describes:
> > coefficients = <-538 407000>; /* for the zone on bcm2835 and bcm2836 */
> >
> > and
> >
> > coefficients = <-538 412000>; /* for the zone on bcm2837 */
> >
> >
> > Despite the changes mentioned for the driver and DT, I am ok with the driver and the DTS descriptors.
>
> thanks for providing the necessary driver changes, but the coefficients above causes a DTC parse error. The Device Tree doesn't provide support for native signed integer. Looking at this old thread [1] suggests to add parentheses which fixed the parse issue. But of-thermal expected u32 for coefficients [2].
>
> Any suggestions?
I am OK if you provide a patch to of-thermal in your series, assuming
that would fix the representation issue the data of your driver has.
BR,
>
> [1] - http://lists.infradead.org/pipermail/linux-arm-kernel/2013-April/159681.html
> [2] - http://elixir.free-electrons.com/source/drivers/thermal/of-thermal.c?v=4.10-rc7#L854
>
> >
> > BR,
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
