Às 9:50 AM de 2/17/2017, Kishon Vijay Abraham I escreveu: > Add Documentation to help users use pci endpoint to configure > pci endpoint function and to bind the endpoint function > with endpoint controller. > > Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> > --- > Documentation/PCI/00-INDEX | 2 + > Documentation/PCI/endpoint/pci-endpoint-cfs.txt | 84 +++++++++++++++++++++++ > 2 files changed, 86 insertions(+) > create mode 100644 Documentation/PCI/endpoint/pci-endpoint-cfs.txt > > diff --git a/Documentation/PCI/00-INDEX b/Documentation/PCI/00-INDEX > index ba950b2..f84a23c 100644 > --- a/Documentation/PCI/00-INDEX > +++ b/Documentation/PCI/00-INDEX > @@ -14,3 +14,5 @@ pcieaer-howto.txt > - the PCI Express Advanced Error Reporting Driver Guide HOWTO > endpoint/pci-endpoint.txt > - guide to add endpoint controller driver and endpoint function driver. > +endpoint/pci-endpoint-cfs.txt > + - guide to use configfs to configure the pci endpoint function. > diff --git a/Documentation/PCI/endpoint/pci-endpoint-cfs.txt b/Documentation/PCI/endpoint/pci-endpoint-cfs.txt > new file mode 100644 > index 0000000..d9f8734 > --- /dev/null > +++ b/Documentation/PCI/endpoint/pci-endpoint-cfs.txt > @@ -0,0 +1,84 @@ > + CONFIGURING PCI ENDPOINT USING CONFIGFS > + Kishon Vijay Abraham I <kishon@xxxxxx> > + > +The PCI Endpoint Core exposes configfs entry (pci_ep) in order to configure the > +PCI endpoint function and in order to bind the endpoint function > +with the endpoint controller. (For introducing other mechanisms to > +configure the PCI Endpoint Function refer [1]). > + > +*) Mounting configfs > + > +The PCI Endpoint Core layer creates pci_ep directory in the mounted configfs > +directory. configfs can be mounted using the following command. > + > + mount -t configfs none /sys/kernel/config > + > +*) Directory Structure > + > +The pci_ep configfs directory structure has been created to reflect the > +natural tree like structure of PCI devices. So every directory created > +inside pci_ep represents a EPC device and every directory created inside > +epf directory represents EPF device. > + > +/sys/kernel/config/pci_ep/ > + | <dir>/ --------------------------------------> [2] > + | epc > + | epf/ > + | <dir>/ --------------------------> [3] > + | vendorid > + | deviceid > + | revid > + | progif_code > + | subclass_code > + | baseclass_code > + | cache_line_size > + | subsys_vendor_id > + | subsys_id > + | interrupt_pin > + | function > + > +*) Creating configfs entry for EPC > + > +Any directory created inside *pci_ep* represents an EPC device. In the above > +directory structure [2] represents an EPC device. It consists of > + > + *) epc: Use it to associate the configfs entry to an actual EPC device. > + The list of valid entries for this field can be obtained from > + ls /sys/class/pci_epc/ > + > + *) epf: Directory that contains all the endpoint functions. The name > + of the created directory determines the driver this particular > + epf device will be bound to. The name can be obtained either > + from the function binding documentation [4] or > + ls /sys/bus/pci-epf/drivers > + > + If more than one endpoint function device has to be bound to > + the same driver, then the directory should be created using > + the following notation > + mkdir <name>.<num> > + > +*) Creating configfs entry for EPF > + > +Any directory created inside *epf* directory represents an EPF device. In the > +above directory structure, [3] represents an EPF device. It consists of the > +following entries that can be used to configure the standard configuration > +header of the endpoint function. (These entries are created by the > +framework when any new directory is created inside epf directory.) > + > + | vendorid > + | deviceid > + | revid > + | progif_code > + | subclass_code > + | baseclass_code > + | cache_line_size > + | subsys_vendor_id > + | subsys_id > + | interrupt_pin > + > +The following entry identifies the function driver that is bound to the > +function device > + | function > + > +[1] -> Documentation/PCI/endpoint/pci-endpoint.txt > +[4] -> Documentation/PCI/endpoint/function/binding/ > Good content. Acked-By: Joao Pinto <jpinto@xxxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
