To use HPD notifier sti CEC driver needs to get phandle
of the hdmi device.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
CC: devicetree@xxxxxxxxxxxxxxx
version 3:
- change hdmi phandle from "st,hdmi-handle" to "hdmi-handle"
---
arch/arm/boot/dts/stih407-family.dtsi | 12 ------------
arch/arm/boot/dts/stih410.dtsi | 13 +++++++++++++
2 files changed, 13 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index c8b2944..592d235 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -756,18 +756,6 @@
<&clk_s_c0_flexgen CLK_ETH_PHY>;
};
- cec: sti-cec@094a087c {
- compatible = "st,stih-cec";
- reg = <0x94a087c 0x64>;
- clocks = <&clk_sysin>;
- clock-names = "cec-clk";
- interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
- interrupt-names = "cec-irq";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_cec0_default>;
- resets = <&softreset STIH407_LPM_SOFTRESET>;
- };
-
rng10: rng@08a89000 {
compatible = "st,rng";
reg = <0x08a89000 0x1000>;
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 281a124..71deb02 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -259,5 +259,18 @@
clocks = <&clk_sysin>;
interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
};
+
+ sti-cec@094a087c {
+ compatible = "st,stih-cec";
+ reg = <0x94a087c 0x64>;
+ clocks = <&clk_sysin>;
+ clock-names = "cec-clk";
+ interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
+ interrupt-names = "cec-irq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cec0_default>;
+ resets = <&softreset STIH407_LPM_SOFTRESET>;
+ hdmi-handle = <&sti_hdmi>;
+ };
};
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
