Re: [PATCH v4 36/36] media: imx: propagate sink pad formats to source pads

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 






On 02/16/2017 03:29 AM, Philipp Zabel wrote:
On Wed, 2017-02-15 at 18:19 -0800, Steve Longerbeam wrote:
[...]
diff --git a/drivers/staging/media/imx/imx-ic-prpencvf.c b/drivers/staging/media/imx/imx-ic-prpencvf.c
index dd9d499..c43f85f 100644
--- a/drivers/staging/media/imx/imx-ic-prpencvf.c
+++ b/drivers/staging/media/imx/imx-ic-prpencvf.c
@@ -806,16 +806,22 @@ static int prp_set_fmt(struct v4l2_subdev *sd,
 	if (sdformat->which == V4L2_SUBDEV_FORMAT_TRY) {
 		cfg->try_fmt = sdformat->format;
 	} else {
-		priv->format_mbus[sdformat->pad] = sdformat->format;
+		struct v4l2_mbus_framefmt *f =
+			&priv->format_mbus[sdformat->pad];
+		struct v4l2_mbus_framefmt *outf =
+			&priv->format_mbus[PRPENCVF_SRC_PAD];
+
+		*f = sdformat->format;
 		priv->cc[sdformat->pad] = cc;
-		if (sdformat->pad == PRPENCVF_SRC_PAD) {
-			/*
-			 * update the capture device format if this is
-			 * the IDMAC output pad
-			 */
-			imx_media_mbus_fmt_to_pix_fmt(&vdev->fmt.fmt.pix,
-						      &sdformat->format, cc);
+
+		/* propagate format to source pad */
+		if (sdformat->pad == PRPENCVF_SINK_PAD) {
+			outf->width = f->width;
+			outf->height = f->height;

What about media bus format, field, and colorimetry?

Right, I need to propagate a default media bus format and field
that works.

As for colorimtery, I did see the work you are doing in your
branch, but was not sure if you were finished with that support.
Can you send me a patch?


 		}
+
+		/* update the capture device format from output pad */
+		imx_media_mbus_fmt_to_pix_fmt(&vdev->fmt.fmt.pix, outf, cc);
 	}

 	return 0;
diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
index 3e6b607..9d9ec03 100644
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -1161,19 +1161,27 @@ static int csi_set_fmt(struct v4l2_subdev *sd,
 	if (sdformat->which == V4L2_SUBDEV_FORMAT_TRY) {
 		cfg->try_fmt = sdformat->format;
 	} else {
+		struct v4l2_mbus_framefmt *f_direct, *f_idmac;
+
 		priv->format_mbus[sdformat->pad] = sdformat->format;
 		priv->cc[sdformat->pad] = cc;
-		/* Reset the crop window if this is the input pad */
-		if (sdformat->pad == CSI_SINK_PAD)
+
+		f_direct = &priv->format_mbus[CSI_SRC_PAD_DIRECT];
+		f_idmac = &priv->format_mbus[CSI_SRC_PAD_IDMAC];
+
+		if (sdformat->pad == CSI_SINK_PAD) {
+			/* reset the crop window */
 			priv->crop = crop;
-		else if (sdformat->pad == CSI_SRC_PAD_IDMAC) {
-			/*
-			 * update the capture device format if this is
-			 * the IDMAC output pad
-			 */
-			imx_media_mbus_fmt_to_pix_fmt(&vdev->fmt.fmt.pix,
-						      &sdformat->format, cc);
+
+			/* propagate format to source pads */
+			f_direct->width = crop.width;
+			f_direct->height = crop.height;
+			f_idmac->width = crop.width;
+			f_idmac->height = crop.height;

This is missing also media bus format, field and colorimetry
propagation.

Yep, will add that.

Steve


 		}
+
+		/* update the capture device format from IDMAC output pad */
+		imx_media_mbus_fmt_to_pix_fmt(&vdev->fmt.fmt.pix, f_idmac, cc);
 	}

 	return 0;
diff --git a/drivers/staging/media/imx/imx-media-vdic.c b/drivers/staging/media/imx/imx-media-vdic.c
index 61e6017..55fb522 100644
--- a/drivers/staging/media/imx/imx-media-vdic.c
+++ b/drivers/staging/media/imx/imx-media-vdic.c
@@ -649,8 +649,21 @@ static int vdic_set_fmt(struct v4l2_subdev *sd,
 	if (sdformat->which == V4L2_SUBDEV_FORMAT_TRY) {
 		cfg->try_fmt = sdformat->format;
 	} else {
-		priv->format_mbus[sdformat->pad] = sdformat->format;
+		struct v4l2_mbus_framefmt *f =
+			&priv->format_mbus[sdformat->pad];
+		struct v4l2_mbus_framefmt *outf =
+			&priv->format_mbus[VDIC_SRC_PAD_DIRECT];
+
+		*f = sdformat->format;
 		priv->cc[sdformat->pad] = cc;
+
+		/* propagate format to source pad */
+		if (sdformat->pad == VDIC_SINK_PAD_DIRECT ||
+		    sdformat->pad == VDIC_SINK_PAD_IDMAC) {
+			outf->width = f->width;
+			outf->height = f->height;
+			outf->field = V4L2_FIELD_NONE;

This is missing colorimetry, too.

regards
Philipp

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux