The reason behind why fixed rate clock "ref12" couldn't be moved from .dtsi to .dts: There was nothing else in "clocks { .. }", the entire block was then deleted from .dtsi. If a skeleton "clocks { .. }" remain in .dtsi, the node can then be moved to .dts, and of_clk_get() works again. Changes since v6: 1. move fixed rate clock "ref12" from .dtsi to .dts 2. sort new entry alphabetically in arch/arm/Kconfig 3. rebase to next-20131219: arch/arm/Makefile arch/arm/Kconfig Applies to next-20131219 Jonas Jensen (2): ARM: mach-moxart: add MOXA ART SoC platform files ARM: mach-moxart: add MOXA ART SoC device tree files Documentation/devicetree/bindings/arm/moxart.txt | 12 ++ arch/arm/Kconfig | 2 + arch/arm/Makefile | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/moxart-uc7112lx.dts | 117 ++++++++++++++++++ arch/arm/boot/dts/moxart.dtsi | 148 ++++++++++++++++++++++ arch/arm/configs/moxart_defconfig | 149 +++++++++++++++++++++++ arch/arm/mach-moxart/Kconfig | 31 +++++ arch/arm/mach-moxart/Makefile | 3 + arch/arm/mach-moxart/moxart.c | 15 +++ 10 files changed, 479 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/moxart.txt create mode 100644 arch/arm/boot/dts/moxart-uc7112lx.dts create mode 100644 arch/arm/boot/dts/moxart.dtsi create mode 100644 arch/arm/configs/moxart_defconfig create mode 100644 arch/arm/mach-moxart/Kconfig create mode 100644 arch/arm/mach-moxart/Makefile create mode 100644 arch/arm/mach-moxart/moxart.c -- 1.8.2.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html