RE: [PATCH 2/3] dt-bindings: power: reset: add document for renesas-reset driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Geert,

On Tuesday, February 14, 2017, Geert Uytterhoeven wrote:
> > +Required properties:
> > +  - compatible: must be one or more of the following:
> > +    - "renesas,r7s72100-reset" for the r7s72100 SoC
> > +    - "renesas,wdt-reset"
> > +                This is a fallback for the above renesas,*-reset
> > +entries
> 
> Please use "renesas,r7s72100-wdt". DT describes the hardware (watchdog),
> not the software policy (use it for reset only, as a max. timeout of 125
> ms is too short for a usable watchdog).


I had a look at:

  Documentation/devicetree/bindings/watchdog/renesas-wdt.txt

Which has:

Required properties:
- compatible : Should be "renesas,<soctype>-wdt", and
	       "renesas,rcar-gen3-wdt" as fallback.
	       Examples with soctypes are:
	         - "renesas,r8a7795-wdt" (R-Car H3)
	         - "renesas,r8a7796-wdt" (R-Car M3-W)


So in my 'renesas-reset.txt' should I do:

A. "renesas,r7s72100-wdt", "renesas,rz-wdt"

  or just: 

B. "renesas,r7s72100-wdt"   (no fallback, change the driver to add new SoCs)


Thoughts????


Thank you,
Chris


��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux