On Thu, Dec 19, 2013 at 12:25:34PM -0500, Anson Huang wrote: > This patch adds support for imx6qdl-sabresd board's power > key, the key is named "SW1" on board, press it can wake up > system from suspend. > > Signed-off-by: Anson Huang <b20788@xxxxxxxxxxxxx> > --- > arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > index e75e11b..85e3487 100644 > --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > @@ -47,6 +47,13 @@ > gpio-keys { > compatible = "gpio-keys"; > > + power { > + label = "Power Button"; > + gpios = <&gpio3 29 0>; > + linux,code = <116>; /* KEY_POWER */ The patch looks good. But I want to ask for more. - Move linux,code to the bottom, so that it follows the order used in volume-up and volume-down. - Replace magic number 116 with macro KEY_POWER defined in include/dt-bindings/input/input.h, as well as the numbers in volume-up and volume-down. - Create a pinctrl entry in gpio-keys node, and move the following out from pinctrl_hog into there. MX6QDL_PAD_EIM_D29__GPIO3_IO29 MX6QDL_PAD_GPIO_4__GPIO1_IO04 MX6QDL_PAD_GPIO_5__GPIO1_IO05 Shawn > + gpio-key,wakeup; > + }; > + > volume-up { > label = "Volume Up"; > gpios = <&gpio1 4 0>; > @@ -182,6 +189,7 @@ > MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 > MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 > MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 > + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 > >; > }; > }; > -- > 1.7.9.5 > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html