According to using PHY framework, updates the exynos5440-pcie binding.
For maintaining backward compatibility, leaves the current dt-binding.
(It should be deprecated.)
Recommends to use the Phy Framework and "config" property to follow
the designware-pcie binding.
If you use the old way, can see "mssing *config* reg space" message.
Because the getting configuration space address from range is old way.
NOTE: When use the "config" property, first name of 'reg-names' must be
set to "elbi". Otherwise driver can't maintain the backward capability.
Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Reviewed-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
Reviewed-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
---
Changelog on V3:
- Fixes a typo
Changelog on V2:
- Describes more commit message
- Fixes the typos
- Adds the new example for using PHY framework
- Deprecated the old dt-binding description
- Removes 'phy-names'
.../bindings/pci/samsung,exynos5440-pcie.txt | 29 ++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt
index 4f9d23d..7d3b094 100644
--- a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt
@@ -7,8 +7,19 @@ Required properties:
- compatible: "samsung,exynos5440-pcie"
- reg: base addresses and lengths of the pcie controller,
the phy controller, additional register for the phy controller.
+ (Registers for the phy controller are DEPRECATED.
+ Use the PHY framework.)
+- reg-names : First name should be set to "elbi".
+ And use the "config" instead of getting the confgiruation address space
+ from "ranges".
+ NOTE: When use the "config" property, reg-names must be set.
- interrupts: A list of interrupt outputs for level interrupt,
pulse interrupt, special interrupt.
+- phys: From PHY binding. Phandle for the Generic PHY.
+ Refer to Documentation/devicetree/bindings/phy/samsung-phy.txt
+
+Other common properties refer to
+ Documentation/devicetree/binding/pci/designware-pcie.txt
Example:
@@ -54,6 +65,24 @@ SoC specific DT Entry:
num-lanes = <4>;
};
+With using PHY framework:
+ pcie_phy0: pcie-phy@270000 {
+ ...
+ reg = <0x270000 0x1000>, <0x271000 0x40>;
+ reg-names = "phy", "block";
+ ...
+ };
+
+ pcie@290000 {
+ ...
+ reg = <0x290000 0x1000>, <0x40000000 0x1000>;
+ reg-names = "elbi", "config";
+ phys = <&pcie_phy0>;
+ ranges = <0x81000000 0 0 0x60001000 0 0x00010000
+ 0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>;
+ ...
+ };
+
Board specific DT Entry:
pcie@290000 {
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
