On 24/01/17 10:09, Teresa Remmet wrote:
> The phyCORE-AM335x development kit is a combination of the
> phyCORE-AM335x SoM and a PCM-953 carrier board. The features
> of the PCM-953 are:
> * ETH phy on carrier board: 1x RGMII
> * 1x CAN
> * Up to 4x UART
> * USB0 (otg)
> * USB1 (host)
> * SD slot
> * User gpio-keys
> * User LEDs
>
> Signed-off-by: Teresa Remmet <t.remmet@xxxxxxxxx>
> Reviewed-by: Wadim Egorov <w.egorov@xxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> Changes in v2:
> - moved gpio-keys, gpio-leds and regulators nodes to root node
> - moved muxing of gpio-keys and gpio-leds
> - removed not needed compatible "simple-bus"
> - fixed unit address of ethernet phy node
> - removed redundant status properties
> - added Acked-by: Rob Herring <robh@xxxxxxxxxx>
>
> .../devicetree/bindings/arm/omap/omap.txt | 3 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/am335x-pcm-953.dtsi | 288 +++++++++++++++++++++
> arch/arm/boot/dts/am335x-phycore-rdk.dts | 27 ++
> 4 files changed, 319 insertions(+)
> create mode 100644 arch/arm/boot/dts/am335x-pcm-953.dtsi
> create mode 100644 arch/arm/boot/dts/am335x-phycore-rdk.dts
>
[...]
> diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi
> new file mode 100644
> index 0000000..02981ea
> --- /dev/null
> +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi
[...]
};
> + };
> +
> + user_buttons: user_buttons {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&user_buttons_pins>;
> +
> + button@0 {
> + label = "home";
> + linux,code = <KEY_HOME>;
> + gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
> + gpio-key,wakeup;
> + };
> +
> + button@1 {
> + label = "menu";
> + linux,code = <KEY_MENU>;
> + gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
> + gpio-key,wakeup;
Could you please replace this with wakeup-source as specified in
Documentation/devicetree/bindings/power/wakeup-source.txt
I know this patch is merged, just fix it on top of linux-next ?
I think TI/OMAP downstream tree has some remnants of the legacy
boolean and it keeps slipping through every merge window :)
--
Regards,
Sudeep
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
