Re: [PATCH 0/6] net: cpsw: Support for am335x chip MACIDs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, Dec 18, 2013 at 10:40:58PM +0530, Mugunthan V N wrote:
> On Wednesday 18 December 2013 10:38 PM, Felipe Balbi wrote:
> > On Wed, Dec 18, 2013 at 10:30:55PM +0530, Mugunthan V N wrote:
> >> On Wednesday 18 December 2013 10:17 PM, Markus Pargmann wrote:
> >>> Hi,
> >>>
> >>> This series introduces a driver to read and use the MACIDs stored in the am335x
> >>> control module. These are read-only registers for a unique MACID. At the moment
> >>> the MACIDs are generated randomly or they are set by the bootloader.
> >>>
> >>> A device node is added in am33xx dtsi and used by the cpsw slaves in the bone
> >>> board files.
> >>>
> >>> Regards,
> >>>
> >>> Markus
> >>>
> >>>
> >>> Markus Pargmann (6):
> >>>   DT doc: net: cpsw mac-address is optional
> >>>   net: cpsw: header, Add missing include
> >>>   net: cpsw: Add control-module macid driver
> >>>   net: cpsw: Use cpsw-ctrl-macid driver
> >>>   arm: dts: am33xx, Add device node for cpsw-ctrl-macid
> >>>   arm: dts: am335x beagle bone use processor macids
> >>>
> >>>  .../devicetree/bindings/net/cpsw-ctrl-macid.txt    |  31 +++++
> >>>  Documentation/devicetree/bindings/net/cpsw.txt     |   7 +-
> >>>  arch/arm/boot/dts/am335x-bone.dts                  |   8 ++
> >>>  arch/arm/boot/dts/am335x-boneblack.dts             |   8 ++
> >>>  arch/arm/boot/dts/am33xx.dtsi                      |   7 ++
> >>>  drivers/net/ethernet/ti/Kconfig                    |   8 ++
> >>>  drivers/net/ethernet/ti/Makefile                   |   1 +
> >>>  drivers/net/ethernet/ti/cpsw-ctrl-macid.c          | 138 +++++++++++++++++++++
> >>>  drivers/net/ethernet/ti/cpsw.c                     |  18 ++-
> >>>  drivers/net/ethernet/ti/cpsw.h                     |   3 +
> >>>  10 files changed, 224 insertions(+), 5 deletions(-)
> >>>  create mode 100644 Documentation/devicetree/bindings/net/cpsw-ctrl-macid.txt
> >>>  create mode 100644 drivers/net/ethernet/ti/cpsw-ctrl-macid.c
> >>>
> >> Mac ID is to be filled by U-Boot and this kind of approach is already
> >> rejected in linux-omap list.
> >>
> >> If proper ethaddr/eth*addr is populated in U-boot environment variable
> >> then mac-address dt property in ethernet* device nodes will be populated
> >> before boot kernel in U-boot. So I don't think this patch series is
> >> required.
> > but will u-boot read MACID from control module ?
> >
> Yes, U-Boot will read the MACID from control module and if a customer
> wants to have his own MACID, U-boot ENV variable ethaddr/eth1addr must
> be updated.

cool, then I agree this series shouldn't be applied ;-)

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux