Hi, On Friday, January 13, 2017 12:35:44 PM Jyri Sarha wrote: > Changes since first version: > - Cherry-picked "fbdev/ssd1307fb: add support to enable VBAT" again > beacuse of weird mixup in the first version > - Also tested the code on top of v4.10-rc3 with am335x-icev2 evm > > We needed these changes for couple of our evm. Some of these patches > have been on mainline list before, but after that forgotten. Now we > are forward porting these on for out internal release, so this is a > good time to get them to mainline too. > > Everything else is quite straight forward, but removing the > reset-active-low dts property is a questionable at least in > theory. However, in practice if anyone was using the property in their > device-tree blobs, they have never been able to get desired effect > with mainline kernel. > > Jyri Sarha (3): > fbdev: ssd1307fb: Start to use gpiod API for reset gpio > fbdev: ssd1307fb: Remove reset-active-low from the DT binding document > fbdev: ssd1307fb: Make reset gpio devicetree property optional > > Tomi Valkeinen (2): > fbdev/ssd1307fb: add support to enable VBAT > fbdev/ssd1307fb: clear screen in probe > > .../devicetree/bindings/display/ssd1307fb.txt | 5 +- > drivers/video/fbdev/ssd1307fb.c | 55 ++++++++++++++-------- > 2 files changed, 38 insertions(+), 22 deletions(-) Patchset queued for 4.11, thanks. Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
