On Wed, Feb 08, 2017 at 11:02:35AM +0800, Baoyou Xie wrote:
> The pclk is necessary for zx2967 I2S controller. the driver
> currently doesn't handle it. This is something we need to fix.
>
> In turn, the driver supports zx296718's I2S controller.
>
> By the way, this patch also change the clock name from tx to wclk
> to make it clear.
>
> Signed-off-by: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
> ---
> sound/soc/zte/zx-i2s.c | 37 ++++++++++++++++++++++++++++---------
> 1 file changed, 28 insertions(+), 9 deletions(-)
>
> diff --git a/sound/soc/zte/zx-i2s.c b/sound/soc/zte/zx-i2s.c
> index ed7a56d..2d486ea 100644
> --- a/sound/soc/zte/zx-i2s.c
> +++ b/sound/soc/zte/zx-i2s.c
> @@ -95,7 +95,7 @@
> struct zx_i2s_info {
> struct snd_dmaengine_dai_dma_data dma_playback;
> struct snd_dmaengine_dai_dma_data dma_capture;
> - struct clk *dai_clk;
> + struct clk *dai_wclk, *dai_pclk;
It's better to have them on two lines, I would say.
> void __iomem *reg_base;
> int master;
> resource_size_t mapbase;
> @@ -275,8 +275,9 @@ static int zx_i2s_hw_params(struct snd_pcm_substream *substream,
> writel_relaxed(val, i2s->reg_base + ZX_I2S_TIMING_CTRL);
>
> if (i2s->master)
> - ret = clk_set_rate(i2s->dai_clk,
> - params_rate(params) * ch_num * CLK_RAT);
> + ret = clk_set_rate(i2s->dai_wclk,
> + params_rate(params) * ch_num * CLK_RAT);
> +
> return ret;
> }
>
> @@ -328,8 +329,19 @@ static int zx_i2s_startup(struct snd_pcm_substream *substream,
> struct snd_soc_dai *dai)
> {
> struct zx_i2s_info *zx_i2s = dev_get_drvdata(dai->dev);
> + int ret;
> +
> + ret = clk_prepare_enable(zx_i2s->dai_wclk);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(zx_i2s->dai_pclk);
> + if (ret) {
> + clk_disable_unprepare(zx_i2s->dai_wclk);
> + return ret;
> + }
>
> - return clk_prepare_enable(zx_i2s->dai_clk);
> + return ret;
> }
>
> static void zx_i2s_shutdown(struct snd_pcm_substream *substream,
> @@ -337,7 +349,8 @@ static void zx_i2s_shutdown(struct snd_pcm_substream *substream,
> {
> struct zx_i2s_info *zx_i2s = dev_get_drvdata(dai->dev);
>
> - clk_disable_unprepare(zx_i2s->dai_clk);
> + clk_disable_unprepare(zx_i2s->dai_wclk);
> + clk_disable_unprepare(zx_i2s->dai_pclk);
> }
>
> static struct snd_soc_dai_ops zx_i2s_dai_ops = {
> @@ -381,10 +394,16 @@ static int zx_i2s_probe(struct platform_device *pdev)
> if (!zx_i2s)
> return -ENOMEM;
>
> - zx_i2s->dai_clk = devm_clk_get(&pdev->dev, "tx");
> - if (IS_ERR(zx_i2s->dai_clk)) {
> - dev_err(&pdev->dev, "Fail to get clk\n");
> - return PTR_ERR(zx_i2s->dai_clk);
> + zx_i2s->dai_wclk = devm_clk_get(&pdev->dev, "wclk");
> + if (IS_ERR(zx_i2s->dai_wclk)) {
> + dev_err(&pdev->dev, "Fail to get wclk\n");
> + return PTR_ERR(zx_i2s->dai_wclk);
> + }
> +
> + zx_i2s->dai_pclk = devm_clk_get(&pdev->dev, "pclk");
> + if (IS_ERR(zx_i2s->dai_pclk)) {
> + dev_info(&pdev->dev, "have no pclk\n");
> + zx_i2s->dai_pclk = NULL;
The 'pclk' is actually required instead of optional. Since we haven't
got any in-tree DTB with I2S device yet, there is no DT compatibility to
maintain. So it should be good to make 'pclk' required right now.
Shawn
> }
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
