This adds a node for the TI ADS7957 analog/digital converter on LEGO
MINDSTORMS EV3 as well as a regulator node that is used by the A/DC node.
Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/da850-lego-ev3.dts | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index 112ec92..0309537 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -139,6 +139,19 @@
enable-active-high;
regulator-boot-on;
};
+
+ /*
+ * This is a simple voltage divider on VCC5V to provide a 2.5V
+ * reference signal to the ADC.
+ */
+ adc_ref: regulator2 {
+ compatible = "regulator-fixed";
+ regulator-name = "adc ref";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-boot-on;
+ vin-supply = <&vcc5v>;
+ };
};
&pmx_core {
@@ -293,6 +306,14 @@
};
};
};
+
+ adc: adc@3 {
+ compatible = "ti,ads7957";
+ reg = <3>;
+ #io-channel-cells = <1>;
+ spi-max-frequency = <10000000>;
+ vref-supply = <&adc_ref>;
+ };
};
&gpio {
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
