[PATCH v6 2/9] doc: DT: venus: binding document for Qualcomm video driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Add binding document for Venus video encoder/decoder driver

Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
---
Changes since previous v5:
 * dropped rproc phandle (remoteproc is not used anymore)
 * added subnodes paragraph with descrition of three subnodes:
    - video-decoder and video-encoder - describes decoder (core0) and
    encoder (core1) power-domains and clocks (applicable for msm8996
    Venus core).
    - video-firmware - needed to get reserved memory region where the
    firmware is stored.

 .../devicetree/bindings/media/qcom,venus.txt       | 112 +++++++++++++++++++++
 1 file changed, 112 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/qcom,venus.txt

diff --git a/Documentation/devicetree/bindings/media/qcom,venus.txt b/Documentation/devicetree/bindings/media/qcom,venus.txt
new file mode 100644
index 000000000000..4427af3ca5a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,venus.txt
@@ -0,0 +1,112 @@
+* Qualcomm Venus video encode/decode accelerator
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: Value should contain one of:
+		- "qcom,msm8916-venus"
+		- "qcom,msm8996-venus"
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: Register base address and length of the register map.
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: Should contain interrupt line number.
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A List of phandle and clock specifier pairs as listed
+		    in clock-names property.
+- clock-names:
+	Usage: required for msm8916
+	Value type: <stringlist>
+	Definition: Should contain the following entries:
+		- "core"	Core video accelerator clock
+		- "iface"	Video accelerator AHB clock
+		- "bus"		Video accelerator AXI clock
+- clock-names:
+	Usage: required for msm8996
+	Value type: <stringlist>
+	Definition: Should contain the following entries:
+		- "core"	Core video accelerator clock
+		- "iface"	Video accelerator AHB clock
+		- "bus"		Video accelerator AXI clock
+		- "mbus"	Video MAXI clock
+- power-domains:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A phandle and power domain specifier pairs to the
+		    power domain which is responsible for collapsing
+		    and restoring power to the peripheral.
+- iommus:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A list of phandle and IOMMU specifier pairs.
+
+* Subnodes
+The Venus node must contain three subnodes representing video-decoder,
+video-encoder and video-firmware.
+
+Every of video-encoder or video-decoder subnode should have:
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: Value should contain "venus-decoder" or "venus-encoder"
+- clocks:
+	Usage: required for msm8996
+	Value type: <prop-encoded-array>
+	Definition: A List of phandle and clock specifier pairs as listed
+		    in clock-names property.
+- clock-names:
+	Usage: required for msm8996
+	Value type: <stringlist>
+	Definition: Should contain the following entries:
+		- "core"	Subcore video accelerator clock
+
+- power-domains:
+	Usage: required for msm8996
+	Value type: <prop-encoded-array>
+	Definition: A phandle and power domain specifier pairs to the
+		    power domain which is responsible for collapsing
+		    and restoring power to the subcore.
+
+The video-firmware subnode should contain:
+
+- memory-region:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to the reserved-memory for the memory region
+
+* An Example
+	video-codec@1d00000 {
+		compatible = "qcom,msm8916-venus";
+		reg = <0x01d00000 0xff000>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
+			 <&gcc GCC_VENUS0_AHB_CLK>,
+			 <&gcc GCC_VENUS0_AXI_CLK>;
+		clock-names = "core", "iface", "bus";
+		power-domains = <&gcc VENUS_GDSC>;
+		iommus = <&apps_iommu 5>;
+
+		video-decoder {
+			compatible = "venus-decoder";
+			clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+			clock-names = "core";
+			power-domains = <&mmcc VENUS_CORE0_GDSC>;
+		};
+
+		video-encoder {
+			compatible = "venus-encoder";
+			clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
+			clock-names = "core";
+			power-domains = <&mmcc VENUS_CORE1_GDSC>;
+		};
+
+		video-firmware {
+			memory-region = <&venus_mem>;
+		};
+	};
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux