Please ignore this series of patches, due to the first version have been
merged into usb-next branch except DTS's one[PACH 4/6].
This will cause mtu3 probe failure, so I will send new patches based on
usb-next branch.
sorry
On Mon, 2017-02-06 at 17:29 +0800, Chunfeng Yun wrote:
> Due to the reference clock comes from 26M oscillator directly
> on mt8173, and it is a fixed-clock in DTS which always turned
> on, we ignore it before. But on some platforms, it comes
> from PLL, and need be controlled, so here add it, no matter
> it is a fixed-clock or not.
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
> ---
> .../devicetree/bindings/usb/mt8173-mtu3.txt | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt b/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
> index e049d19..8c976cd 100644
> --- a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
> +++ b/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
> @@ -10,7 +10,7 @@ Required properties:
> - vusb33-supply : regulator of USB avdd3.3v
> - clocks : a list of phandle + clock-specifier pairs, one for each
> entry in clock-names
> - - clock-names : must contain "sys_ck" for clock of controller;
> + - clock-names : must contain "sys_ck" and "ref_ck" for clock of controller;
> "wakeup_deb_p0" and "wakeup_deb_p1" are optional, they are
> depends on "mediatek,enable-wakeup"
> - phys : a list of phandle + phy specifier pairs
> @@ -56,10 +56,10 @@ ssusb: usb@11271000 {
> phys = <&phy_port0 PHY_TYPE_USB3>,
> <&phy_port1 PHY_TYPE_USB2>;
> power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
> - clocks = <&topckgen CLK_TOP_USB30_SEL>,
> + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
> <&pericfg CLK_PERI_USB0>,
> <&pericfg CLK_PERI_USB1>;
> - clock-names = "sys_ck",
> + clock-names = "sys_ck", "ref_ck",
> "wakeup_deb_p0",
> "wakeup_deb_p1";
> vusb33-supply = <&mt6397_vusb_reg>;
> @@ -79,8 +79,8 @@ ssusb: usb@11271000 {
> reg-names = "mac";
> interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
> - clocks = <&topckgen CLK_TOP_USB30_SEL>;
> - clock-names = "sys_ck";
> + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
> + clock-names = "sys_ck", "ref_ck";
> vusb33-supply = <&mt6397_vusb_reg>;
> status = "disabled";
> };
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
