G'day, On 7 Feb 2017 at 01:09:09, Wojciech Ziemba wrote: > diff --git a/Documentation/devicetree/bindings/power/supply/bq2416x.txt > b/Documentation/devicetree/bindings/power/supply/bq2416x.txt > new file mode 100644 > index 0000000..8f4b814 > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/supply/bq2416x.txt DT docs are usually added/amended in a separate patch. > @@ -0,0 +1,71 @@ > +Binding for TI bq2416x Li-Ion Charger > ... > +Optional properties: > +=================== > +- interrupt-names: Meanigfull irq name. > +- ti,charge-voltage: Charge volatge [mV]. > +- ti,charge-current: Charge current [mA]. > +- ti,termination-current: Termination current [mA}. > +- ti,in-current-limit: IN source current limit. enum: > + - IN_CURR_LIM_1500MA (0) > + - IN_CURR_LIM_2500MA (1) > + > +- ti,usb-current-limit: USB source current limit. enum: > + - USB_CURR_LIM_100MA (0) > + - USB_CURR_LIM_150MA (1) > + - USB_CURR_LIM_500MA (2) > + - USB_CURR_LIM_800MA (3) > + - USB_CURR_LIM_900MA (4) > + - USB_CURR_LIM_1500MA (5) DT values are usually uA, uV, uAh, etc. DT properties usually get a unit suffix, e.g. -microamp. See Documentation/devicetree/bindings/property-units.txt and https://patchwork.kernel.org/patch/9555541/ > +- ti,status-pin-enable: 0 or 1. Enable charge status output STAT pin. > +- ti,current-termination-enable:0 or 1. Enable charge current termination. > +- ti,usb-dpm-voltage: USB dpm voltage [mV]. Refer to datasheet. > +- ti,in-dpm-voltage: IN dpm voltage [mV]. > +- ti,safety-timer: Safety timer. enum: > + - TMR_27MIN (0) > + - TMR_6H (1) > + - TMR_9H (2) > + - TMR_OFF (3) > + > +- ti,supplied-to: string array: max 4. Names of devices to which > + the charger supplies. You might want to use and/or add to power_supply_battery_info, which Sebastian asked for, see: https://patchwork.kernel.org/patch/9555539/ https://patchwork.kernel.org/patch/9555545/ https://patchwork.kernel.org/patch/9555547/ https://patchwork.kernel.org/patch/9555549/ I'm also at work on a patch for BQ24190 which adds: battery:precharge-current-microamp -> info.precharge_current_ua -> POWER_SUPPLY_PROP_PRECHARGE_CURRENT battery:endcharge-current-microamp -> info.endcharge_current_ua -> POWER_SUPPLY_PROP_ENDCHARGE_CURRENT Hope that helps! -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
