Re: [PATCH 1/2] dt-bindings: display: panel: Add bindings for the Sitronix ST7789V panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, Feb 03, 2017 at 10:59:05AM +0100, Maxime Ripard wrote:
> The Sitronix ST7789V is an LCD panel controller, controlled over SPI, that
> can drive 18-bits 240x320 LCD displays.
> 
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt | 36 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt
> new file mode 100644
> index 000000000000..f70e6e9c54ed
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt
> @@ -0,0 +1,36 @@
> +Sitronix ST7789V RGB panel with SPI control bus
> +
> +Required properties:
> +  - compatible: "sitronix,st7789v"
> +  - reg: Chip select of the panel on the SPI bus
> +  - reset-gpios: a GPIO phandle for the reset pin

Shouldn't this have some sort of power supply?

Thierry

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux