The dw-mipi-dsi of rk3399 is almost the same as rk3288, the rk3399 has additional phy config clock. Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> --- Changes in v5: None Changes in v4: None Changes in v3: None .../devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt index 1753f0c..0f82568 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt @@ -5,10 +5,12 @@ Required properties: - #address-cells: Should be <1>. - #size-cells: Should be <0>. - compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi". + "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi". - reg: Represent the physical address range of the controller. - interrupts: Represent the controller's interrupt to the CPU(s). - clocks, clock-names: Phandles to the controller's pll reference - clock(ref) and APB clock(pclk), as described in [1]. + clock(ref) and APB clock(pclk). For RK3399, a phy config clock + (phy_cfg) is additional required. As described in [1]. - rockchip,grf: this soc should set GRF regs to mux vopl/vopb. - ports: contain a port node with endpoint definitions as defined in [2]. For vopb,set the reg = <0> and set the reg = <1> for vopl. -- 2.6.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html