Hi Kishon,
On 11/19/2015 07:09 PM, Kishon Vijay Abraham I wrote:
Hi,
On Tuesday 17 November 2015 01:41 PM, Alim Akhtar wrote:
Hi
Thanks again for looking into this.
On 11/17/2015 11:46 AM, Kishon Vijay Abraham I wrote:
Hi,
On Monday 09 November 2015 10:56 AM, Alim Akhtar wrote:
From: Seungwon Jeon <essuuj@xxxxxxxxx>
This patch introduces Exynos UFS PHY driver. This driver
supports to deal with phy calibration and power control
according to UFS host driver's behavior.
Signed-off-by: Seungwon Jeon <essuuj@xxxxxxxxx>
Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
Cc: Kishon Vijay Abraham I <kishon@xxxxxx>
---
drivers/phy/Kconfig | 7 ++
drivers/phy/Makefile | 1 +
drivers/phy/phy-exynos-ufs.c | 241
++++++++++++++++++++++++++++++++++++
drivers/phy/phy-exynos-ufs.h | 85 +++++++++++++
drivers/phy/phy-exynos7-ufs.h | 89 +++++++++++++
include/linux/phy/phy-exynos-ufs.h | 85 +++++++++++++
6 files changed, 508 insertions(+)
create mode 100644 drivers/phy/phy-exynos-ufs.c
create mode 100644 drivers/phy/phy-exynos-ufs.h
create mode 100644 drivers/phy/phy-exynos7-ufs.h
create mode 100644 include/linux/phy/phy-exynos-ufs.h
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 7eb5859dd035..7d38a92e0297 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -389,4 +389,11 @@ config PHY_CYGNUS_PCIE
Enable this to support the Broadcom Cygnus PCIe PHY.
If unsure, say N.
+config PHY_EXYNOS_UFS
+ tristate "EXYNOS SoC series UFS PHY driver"
+ depends on OF && ARCH_EXYNOS || COMPILE_TEST
+ select GENERIC_PHY
+ help
+ Support for UFS PHY on Samsung EXYNOS chipsets.
+
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 075db1a81aa5..9bec4d1a89e1 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) +=
phy-armada375-usb2.o
obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
+obj-$(CONFIG_PHY_EXYNOS_UFS) += phy-exynos-ufs.o
obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
diff --git a/drivers/phy/phy-exynos-ufs.c b/drivers/phy/phy-exynos-ufs.c
new file mode 100644
index 000000000000..cb1aeaa3d4eb
--- /dev/null
+++ b/drivers/phy/phy-exynos-ufs.c
@@ -0,0 +1,241 @@
+/*
+ * UFS PHY driver for Samsung EXYNOS SoC
+ *
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd.
+ * Author: Seungwon Jeon <essuuj@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/phy/phy-exynos-ufs.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "phy-exynos-ufs.h"
+
+#define for_each_phy_lane(phy, i) \
+ for (i = 0; i < (phy)->lane_cnt; i++)
+#define for_each_phy_cfg(cfg) \
+ for (; (cfg)->id; (cfg)++)
+
+#define PHY_DEF_LANE_CNT 1
+
+static void exynos_ufs_phy_config(struct exynos_ufs_phy *phy,
+ const struct exynos_ufs_phy_cfg *cfg, u8 lane)
+{
+ enum {LANE_0, LANE_1}; /* lane index */
+
+ switch (lane) {
+ case LANE_0:
+ writel(cfg->val, (phy)->reg_pma + cfg->off_0);
+ break;
+ case LANE_1:
+ if (cfg->id == PHY_TRSV_BLK)
+ writel(cfg->val, (phy)->reg_pma + cfg->off_1);
+ break;
+ }
+}
+
+static bool match_cfg_to_pwr_mode(u8 desc, u8 required_pwr)
+{
+ if (IS_PWR_MODE_ANY(desc))
+ return true;
+
+ if (IS_PWR_MODE_HS(required_pwr) && IS_PWR_MODE_HS_ANY(desc))
+ return true;
+
+ if (COMP_PWR_MODE(required_pwr, desc))
+ return true;
+
+ if (COMP_PWR_MODE_MD(required_pwr, desc) &&
+ COMP_PWR_MODE_GEAR(required_pwr, desc) &&
+ COMP_PWR_MODE_SER(required_pwr, desc))
+ return true;
+
+ return false;
+}
+
+int exynos_ufs_phy_calibrate(struct phy *phy,
+ enum phy_cfg_tag tag, u8 pwr)
This is similar to the first version of your patch without EXPORT_SYMBOL.
I think you have to create a new generic PHY_OPS for calibrate PHY while making
sure that it is as generic as possible (which means calibrate_phy shouldn't
have tag and pwr arguments or a strong justification as to why those arguments
are required in a generic API).
I don't see the advantage to making this a generic phy_ops, this is exynos
specific ufs-phy, please have a look at other implementations
only the implementation is specific to exynos. I've seen lot of other vendors
want to do something like calibrate phy.
So if we add something like (*calibrate)(struct phy *phy), then it can be used
by others as well. Russell King also want to minimize the code to program
calibration settings. So it would be good to come up with a set of standard
bindings like 'phy,tx-swing', 'phy,emphasis', 'phy,amplitude' etc.. to program
these settings.
drivers/phy/phy-qcom-ufs.c (which I belive mereged recently)
Thats why I hate when someone else merge PHY drivers :-( That driver can as
well be in drivers/misc as it doesn't use PHY framework as it is supposed to be
used. It just exports a dozen of API's to be used by controller drivers. ick..
may be other vendors might come with there own implementation of phy.
right, it's all about providing the correct callback functions.
I am using what is currently provided by the generic phy framework.
I think for your use case, what is currently provided in the PHY framework is
not sufficient.
Its little over a year since last time we discuss about adding a generic
calibration API. I can see in the past people tried adding *calibration*
API [1] but not sure why [1] was not landed in mainline.
Anyway now we have many users of phy_calibration API, like UFS, USB and
may be PCIe, there is a real need to add this functionality. So, here is
my approach:
* Along with [1], we can add a void *priv for handling device specific
phy private data, and before calling phy_calibration() from phy
consumer, phy->priv is populated with private data.
This approach solves exynos-ufs-phy calibration as well.
please have a look on the snapshot below, if you are ok, will post a
proper patch for this:
[1]: https://patchwork.kernel.org/patch/4545941/
----
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index a268f4d..78cec14 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -357,6 +357,26 @@ int phy_set_mode(struct phy *phy, enum phy_mode mode)
}
EXPORT_SYMBOL_GPL(phy_set_mode);
+int phy_calibrate(struct phy *phy)
+{
+ int ret = -ENOTSUPP;
+
+ if(!phy || !phy->ops->calibrate)
+ return 0;
+
+ mutex_lock(&phy->mutex);
+ ret = phy->ops->calibrate(phy);
+ if (ret < 0) {
+ dev_err(&phy->dev, "phy calibration failed %d\n", ret);
+ goto out;
+ }
+
+out:
+ mutex_unlock(&phy->mutex);
+
+ return ret;
+}
+
int phy_reset(struct phy *phy)
{
int ret;
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index 78bb0d7..ca3a6d4 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -45,6 +45,7 @@ struct phy_ops {
int (*power_on)(struct phy *phy);
int (*power_off)(struct phy *phy);
int (*set_mode)(struct phy *phy, enum phy_mode mode);
+ int (*calibrate)(struct phy *phy);
int (*reset)(struct phy *phy);
struct module *owner;
};
@@ -67,6 +68,7 @@ struct phy_attrs {
* @init_count: used to protect when the PHY is used by multiple consumers
* @power_count: used to protect when the PHY is used by multiple
consumers
* @phy_attrs: used to specify PHY specific attributes
+ * @priv: used to specify PHY specific private data
*/
struct phy {
struct device dev;
@@ -77,6 +79,7 @@ struct phy {
int power_count;
struct phy_attrs attrs;
struct regulator *pwr;
+ void *priv;
};
/**
@@ -138,6 +141,7 @@ int phy_exit(struct phy *phy);
int phy_power_on(struct phy *phy);
int phy_power_off(struct phy *phy);
int phy_set_mode(struct phy *phy, enum phy_mode mode);
+int phy_calibrate(struct phy *phy);
int phy_reset(struct phy *phy);
static inline int phy_get_bus_width(struct phy *phy)
{
@@ -253,6 +257,13 @@ static inline int phy_set_mode(struct phy *phy,
enum phy_mode mode)
return -ENOSYS;
}
+static inline int phy_calibrate(struct phy *phy)
+{
+ if (!phy)
+ return 0;
+ return -ENOSYS;
+}
+
static inline int phy_reset(struct phy *phy)
{
if (!phy)
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
