From: Markus Mayer <mmayer@xxxxxxxxxxxx> This CPUfreq driver provides basic frequency scaling for older Broadcom STB SoCs that do not use AVS firmware with DVFS support. There is no support for voltage scaling. v5 of this patch can be found at: https://lkml.org/lkml/2017/1/18/1093 Changes since v5: - Removed DT properties div-table and div-shift-width (Stephen Boyd) - Renamed node from cpu-clk-div@... to clock-controller@... (Rob Herring) - No code changes v4 of this patch can be found at: https://lkml.org/lkml/2016/12/20/670 Changes since v4: - Simplified (and hopefully clarified) binding document - No code changes v3 of this patch can be found at: https://lkml.org/lkml/2016/11/22/747 Changes since v3: - added binding document - got rid of calls to __clk_lookup(), using devm_clk_get() instead - re-worked clock lookup code a bit, along with switching to devm_clk_get() - get_frequencies() became a void function, removing the need for some error checking - fixed CONFIG_ARM_BRCM_AVS_CPUFREQ typo - fixed MODULE_DEVICE_TABLE declaration Markus Mayer (2): dt-bindings: brcm: clocks: add binding for brcmstb-cpu-clk-div cpufreq: brcmstb-cpufreq: CPUfreq driver for older Broadcom STB SoCs .../bindings/clock/brcm,brcmstb-cpu-clk-div.txt | 22 ++ MAINTAINERS | 1 + drivers/cpufreq/Kconfig.arm | 12 + drivers/cpufreq/Makefile | 1 + drivers/cpufreq/brcmstb-cpufreq.c | 377 +++++++++++++++++++++ 5 files changed, 413 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/brcm,brcmstb-cpu-clk-div.txt create mode 100644 drivers/cpufreq/brcmstb-cpufreq.c -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html