On Saturday, January 28, 2017 9:48:36 PM CET Linus Walleij wrote: > + interrupt-map-mask = <0xff00 0 0 7>; > + interrupt-map = <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ > + <0x4900 0 0 2 &pci_intc 1>, > + <0x4a00 0 0 3 &pci_intc 2>, > + <0x4b00 0 0 4 &pci_intc 3>, > + <0x5000 0 0 1 &pci_intc 0>, /* Slot 10 */ > + <0x5100 0 0 2 &pci_intc 1>, > + <0x5200 0 0 3 &pci_intc 2>, > + <0x5300 0 0 4 &pci_intc 3>, > + <0x5800 0 0 1 &pci_intc 0>, /* Slot 11 */ > + <0x5900 0 0 2 &pci_intc 1>, > + <0x5a00 0 0 3 &pci_intc 2>, > + <0x5b00 0 0 4 &pci_intc 3>, > + <0x6000 0 0 1 &pci_intc 0>, /* Slot 12 */ > + <0x6100 0 0 2 &pci_intc 1>, > + <0x6200 0 0 3 &pci_intc 2>, > + <0x6300 0 0 4 &pci_intc 3>; > The mapping looks wrong here, we normally don't list interrupts per function so the mask should be 0xf800. Note that the interrupt map is board specific, so this should probably go in the board.dts file rather than platform.dtsi. For this particular board, the interrupt lines appear to have been badly configured so all slots use the same interrupt 0 for IntA. IIRC This also means you can probably use <0 0 0 7> as the mask and just specify each of the four interrupts once. A properly wired board would swizzle the interrupts so that each slot has a different IRQ for its IntA line. Arnd -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
