Hi Folks Sorry, forgot the --subject. This is version 3 of the patchset. Andrew On Tue, Dec 17, 2013 at 09:21:49PM +0100, Andrew Lunn wrote: > Describe the binding for the Marvell MVEBU SATA phy. This driver > can be used at least with Kirkwood, Dove and maybe others. > Additionally, update the SATA binding with the properties to link > to the phy nodes. > > Signed-off-by: Andrew Lunn <andrew@xxxxxxx> > --- > v1->v2: > Correct #phy-cells > Correct number after @ to match first reg address. > Rename to phy-mvebu.txt > > v2->v3: > Renamed to mvebu-phy.txt > Use "port0", "port1" instead of "0", "1" > --- > Documentation/devicetree/bindings/ata/marvell.txt | 6 ++++++ > .../devicetree/bindings/phy/mvebu-phy.txt | 22 ++++++++++++++++++++++ > 2 files changed, 28 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/mvebu-phy.txt > > diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt > index b5cdd20cde9c..4c5447f1068d 100644 > --- a/Documentation/devicetree/bindings/ata/marvell.txt > +++ b/Documentation/devicetree/bindings/ata/marvell.txt > @@ -6,11 +6,17 @@ Required Properties: > - interrupts : Interrupt controller is using > - nr-ports : Number of SATA ports in use. > > +Optional Properties: > +- phys : List of phandles to sata phys > +- phy-names : Should be "port0", "port1", etc, one per phandle > + > Example: > > sata@80000 { > compatible = "marvell,orion-sata"; > reg = <0x80000 0x5000>; > interrupts = <21>; > + phys = <&sata_phy0>, <&sata_phy1>; > + phy-names = "port0", "port1"; > nr-ports = <2>; > } > diff --git a/Documentation/devicetree/bindings/phy/mvebu-phy.txt b/Documentation/devicetree/bindings/phy/mvebu-phy.txt > new file mode 100644 > index 000000000000..6cb3364aeafb > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/mvebu-phy.txt > @@ -0,0 +1,22 @@ > +* Marvell MVEBU SATA PHY > + > +Power control for the SATA phy found on Marvell MVEBU SoCs. > + > +This document extends the binding described in phy-bindings.txt > + > +Required properties : > + > + - reg : Offset and length of the register set for the SATA device > + - compatible : Should be "marvell,mvebu-sata-phy" > + - clocks : phandle of clock and specifier that supplies the device > + - clock-names : Should be "sata" > + > +Example: > + sata-phy@84000 { > + compatible = "marvell,mvebu-sata-phy"; > + reg = <0x84000 0x0334>; > + clocks = <&gate_clk 15>; > + clock-names = "sata"; > + #phy-cells = <0>; > + status = "ok"; > + }; > -- > 1.8.5.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html