On 12/09/2013 03:55 PM, Nishanth Menon wrote: > Craneboard is a hardware development platform based on the Sitara > AM3517 ARM Cortex - A8 microprocessor device - see [1] for more > details. Add basic devices for craneboard as replacement for the board > file scheduled for removal as part of device tree conversion > > [1] http://craneboard.org > > Signed-off-by: Nishanth Menon <nm@xxxxxx> > --- gentle ping.. had'nt seen a response on this patch. Could we queue this up for v3.14-rc1? > Based on: > git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git > branch: omap-for-v3.14/omap3-board-removal 736e812 ARM: OMAP2+: Remove unused platform init code and headers > > Bootlog: http://pastebin.mozilla.org/3744412 > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/am3517-craneboard.dts | 174 +++++++++++++++++++++++++++++++ > 2 files changed, 175 insertions(+) > create mode 100644 arch/arm/boot/dts/am3517-craneboard.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index fc37bca..ad155fc 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -205,6 +205,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ > am335x-boneblack.dtb \ > am335x-nano.dtb \ > am335x-base0033.dtb \ > + am3517-craneboard.dtb \ > am3517-evm.dtb \ > am3517_mt_ventoux.dtb \ > am43x-epos-evm.dtb \ > diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts > new file mode 100644 > index 0000000..2d40b3f > --- /dev/null > +++ b/arch/arm/boot/dts/am3517-craneboard.dts > @@ -0,0 +1,174 @@ > +/* > + * See craneboard.org for more details > + * > + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > +/dts-v1/; > + > +#include "am3517.dtsi" > + > +/ { > + model = "TI AM3517 CraneBoard (TMDSEVM3517)"; > + compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3"; > + > + memory { > + device_type = "memory"; > + reg = <0x80000000 0x10000000>; /* 256 MB */ > + }; > + > + vbat: fixedregulator@0 { > + compatible = "regulator-fixed"; > + regulator-name = "vbat"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-boot-on; > + }; > +}; > + > +&davinci_emac { > + status = "okay"; > +}; > + > +&davinci_mdio { > + status = "okay"; > +}; > + > +&i2c1 { > + clock-frequency = <2600000>; > + > + tps: tps@2d { > + reg = <0x2d>; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <400000>; > + /* goes to expansion connector */ > + status = "disabled"; > +}; > + > +&i2c3 { > + clock-frequency = <400000>; > + /* goes to expansion connector */ > + status = "disabled"; > +}; > + > +&mmc1 { > + vmmc-supply = <&vdd2_reg>; > + bus-width = <8>; > +}; > + > +&mmc2 { > + /* goes to expansion connector */ > + status = "disabled"; > +}; > + > +&mmc3 { > + /* goes to expansion connector */ > + status = "disabled"; > +}; > + > +#include "tps65910.dtsi" > + > +&omap3_pmx_core { > + tps_pins: pinmux_tps_pins { > + pinctrl-single,pins = < > + 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */ > + >; > + }; > +}; > + > +&tps { > + pinctrl-names = "default"; > + pinctrl-0 = <&tps_pins>; > + > + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ > + interrupt-parent = <&intc>; > + > + ti,en-ck32k-xtal; > + > + vcc1-supply = <&vbat>; > + vcc2-supply = <&vbat>; > + vcc3-supply = <&vbat>; > + vcc4-supply = <&vbat>; > + vcc5-supply = <&vbat>; > + vcc6-supply = <&vbat>; > + vcc7-supply = <&vbat>; > + vccio-supply = <&vbat>; > + > + regulators { > + vrtc_reg: regulator@0 { > + regulator-always-on; > + }; > + > + vio_reg: regulator@1 { > + regulator-always-on; > + }; > + > + /* > + * Unused: > + * VDIG1=2.7V,300mA max > + * VDIG2=1.8V,300mA max > + */ > + > + vpll_reg: regulator@7 { > + /* VDDS_DPLL_1V8 */ > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + vaux1_reg: regulator@9 { > + /* VDDS_SRAM_1V8 */ > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + vaux2_reg: regulator@10 { > + /* VDDA1P8V_USBPHY */ > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + /* VAUX33 unused */ > + > + vdac_reg: regulator@8 { > + /* VDDA_DAC_1V8 */ > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + vmmc_reg: regulator@12 { > + /* VDDA3P3V_USBPHY */ > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vdd1_reg: regulator@2 { > + /* VDD_CORE */ > + regulator-name = "vdd_core"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vdd2_reg: regulator@3 { > + /* VDDSHV_3V3 */ > + regulator-name = "vdd_shv"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + /* VDD3 unused */ > + }; > +}; > -- Regards, Nishanth Menon -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
