Hello
On 12/16/2013 03:56 PM, Tomi Valkeinen wrote:
> This is a test for Overo with Palo43 expansion, _not_ Tobi. Palo43
> doesn't have a dts, but seems to work ok with omap3-tobi.dts, so I used
> it as a test.
>
> Not to be merged.
>
FYI, I got the DVI (HDMI connector) on the Overo/Tobi to work with the patch
below (not to be merged, and probably corrupted by our mail server), until a
framebuffer console. So for me:
Tested-by: Florian Vaussard <florian.vaussard@xxxxxxx>
Regards,
Florian
8< --------------------------------
>From 29237c38d35b833efe304b1a58463127555c4748 Mon Sep 17 00:00:00 2001
From: Florian Vaussard <florian.vaussard@xxxxxxx>
Date: Tue, 17 Dec 2013 17:47:04 +0100
Subject: [PATCH] ARM: omap3-tobi.dts: add dvi output
Add DVI output to Overo/Tobi board.
Signed-off-by: Florian Vaussard <florian.vaussard@xxxxxxx>
---
arch/arm/boot/dts/omap3-overo.dtsi | 33 +++++++++++++++++++++++
arch/arm/boot/dts/omap3-tobi.dts | 54
++++++++++++++++++++++++++++++++++++++
2 files changed, 87 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi
b/arch/arm/boot/dts/omap3-overo.dtsi
index a461d2f..90b08f6 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -89,6 +89,39 @@
0x170 (PIN_OUTPUT | MUX_MODE0) /*
uart3_tx_irtx.uart3_tx_irtx */
>;
};
+
+ dss_dpi_pins: pinmux_dss_dpi_pins {
+ pinctrl-single,pins = <
+ 0x0a4 (PIN_OUTPUT | MUX_MODE0) /*
dss_pclk.dss_pclk */
+ 0x0a6 (PIN_OUTPUT | MUX_MODE0) /*
dss_hsync.dss_hsync */
+ 0x0a8 (PIN_OUTPUT | MUX_MODE0) /*
dss_vsync.dss_vsync */
+ 0x0aa (PIN_OUTPUT | MUX_MODE0) /*
dss_acbias.dss_acbias */
+ 0x0ac (PIN_OUTPUT | MUX_MODE0) /*
dss_data0.dss_data0 */
+ 0x0ae (PIN_OUTPUT | MUX_MODE0) /*
dss_data1.dss_data1 */
+ 0x0b0 (PIN_OUTPUT | MUX_MODE0) /*
dss_data2.dss_data2 */
+ 0x0b2 (PIN_OUTPUT | MUX_MODE0) /*
dss_data3.dss_data3 */
+ 0x0b4 (PIN_OUTPUT | MUX_MODE0) /*
dss_data4.dss_data4 */
+ 0x0b6 (PIN_OUTPUT | MUX_MODE0) /*
dss_data5.dss_data5 */
+ 0x0b8 (PIN_OUTPUT | MUX_MODE0) /*
dss_data6.dss_data6 */
+ 0x0ba (PIN_OUTPUT | MUX_MODE0) /*
dss_data7.dss_data7 */
+ 0x0bc (PIN_OUTPUT | MUX_MODE0) /*
dss_data8.dss_data8 */
+ 0x0be (PIN_OUTPUT | MUX_MODE0) /*
dss_data9.dss_data9 */
+ 0x0c0 (PIN_OUTPUT | MUX_MODE0) /*
dss_data10.dss_data10 */
+ 0x0c2 (PIN_OUTPUT | MUX_MODE0) /*
dss_data11.dss_data11 */
+ 0x0c4 (PIN_OUTPUT | MUX_MODE0) /*
dss_data12.dss_data12 */
+ 0x0c6 (PIN_OUTPUT | MUX_MODE0) /*
dss_data13.dss_data13 */
+ 0x0c8 (PIN_OUTPUT | MUX_MODE0) /*
dss_data14.dss_data14 */
+ 0x0ca (PIN_OUTPUT | MUX_MODE0) /*
dss_data15.dss_data15 */
+ 0x0cc (PIN_OUTPUT | MUX_MODE0) /*
dss_data16.dss_data16 */
+ 0x0ce (PIN_OUTPUT | MUX_MODE0) /*
dss_data17.dss_data17 */
+ 0x0d0 (PIN_OUTPUT | MUX_MODE0) /*
dss_data18.dss_data18 */
+ 0x0d2 (PIN_OUTPUT | MUX_MODE0) /*
dss_data19.dss_data19 */
+ 0x0d4 (PIN_OUTPUT | MUX_MODE0) /*
dss_data20.dss_data20 */
+ 0x0d6 (PIN_OUTPUT | MUX_MODE0) /*
dss_data21.dss_data21 */
+ 0x0d8 (PIN_OUTPUT | MUX_MODE0) /*
dss_data22.dss_data22 */
+ 0x0da (PIN_OUTPUT | MUX_MODE0) /*
dss_data23.dss_data23 */
+ >;
+ };
};
&uart3 {
diff --git a/arch/arm/boot/dts/omap3-tobi.dts
b/arch/arm/boot/dts/omap3-tobi.dts
index 7e4ad2a..bfb1a1d 100644
--- a/arch/arm/boot/dts/omap3-tobi.dts
+++ b/arch/arm/boot/dts/omap3-tobi.dts
@@ -81,3 +81,57 @@
&mmc3 {
status = "disabled";
};
+
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ vdds_dsi-supply = <&vpll2>;
+
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+};
+
+/ {
+ aliases {
+ display0 = &dvi0;
+ };
+
+ tfp410: encoder@0 {
+ compatible = "ti,tfp410";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint@0 {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint@0 {
+ remote-endpoint =
<&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector@0 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ i2c-bus = <&i2c3>;
+
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+};
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
