Thanks for the replies! This should tick the boxes on your feedback. Changes since v4: 1. remove all platform specific code 2. move all SoC common nodes (SDHCI,MAC,UART) to dtsi, enable them in board file 3. added moxart_defconfig options: CONFIG_PACKET=y CONFIG_IP_MULTICAST=y 4. removed moxart_defconfig options: # CONFIG_ARM_THUMB is not set Applies to next-20131217 Jonas Jensen (2): ARM: mach-moxart: add MOXA ART SoC platform files ARM: mach-moxart: add MOXA ART SoC device tree files Documentation/devicetree/bindings/arm/moxart.txt | 12 ++ arch/arm/Kconfig | 2 + arch/arm/Makefile | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/moxart-uc7112lx.dts | 93 +++++++++++++ arch/arm/boot/dts/moxart.dtsi | 167 +++++++++++++++++++++++ arch/arm/configs/moxart_defconfig | 149 ++++++++++++++++++++ arch/arm/mach-moxart/Kconfig | 31 +++++ arch/arm/mach-moxart/Makefile | 3 + arch/arm/mach-moxart/moxart.c | 15 ++ 10 files changed, 474 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/moxart.txt create mode 100644 arch/arm/boot/dts/moxart-uc7112lx.dts create mode 100644 arch/arm/boot/dts/moxart.dtsi create mode 100644 arch/arm/configs/moxart_defconfig create mode 100644 arch/arm/mach-moxart/Kconfig create mode 100644 arch/arm/mach-moxart/Makefile create mode 100644 arch/arm/mach-moxart/moxart.c -- 1.8.2.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html