On 28 January 2017 at 15:37, AdityaXavier <adityaxavier@xxxxxxxxx> wrote:
> From: Aditya Xavier <adityaxavier@xxxxxxxxx>
>
> Added two WAN status LEDs and a GPIO Key for Brightness which were missing.
> V2: Updated subject, Power LED names, and WAN labels.
Changelog (V2 ... part) should go into that /comments/ section (see below).
Florian: can you drop that line when applying this patch? Otherwise it
looks OK to me.
> Signed-off-by: Aditya Xavier <adityaxavier@xxxxxxxxx>
Acked-by: Rafał Miłecki <rafal@xxxxxxxxxx>
Thanks for the patch!
> ---
Right here, below these 3 dashes is a place where you can add extra
comments (they won't go into log when doing "git am").
> arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 22 ++++++++++++++++++++--
> 1 file changed, 20 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
> index 92f8a72..90d4420 100644
> --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
> +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
> @@ -27,18 +27,30 @@
> leds {
> compatible = "gpio-leds";
>
> - power0 {
> + power-white {
> label = "bcm53xx:white:power";
> gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
> linux,default-trigger = "default-on";
> };
>
> - power1 {
> + power-amber {
> label = "bcm53xx:amber:power";
> gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
> linux,default-trigger = "default-off";
> };
>
> + wan-white {
> + label = "bcm53xx:white:wan";
> + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "default-on";
> + };
> +
> + wan-amber {
> + label = "bcm53xx:amber:wan";
> + gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "default-off";
> + };
> +
> 5ghz-1 {
> label = "bcm53xx:white:5ghz-1";
> gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
> @@ -104,6 +116,12 @@
> linux,code = <KEY_RESTART>;
> gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
> };
> +
> + brightness {
> + label = "Backlight";
> + linux,code = <KEY_BRIGHTNESS_ZERO>;
> + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
> + };
> };
> };
>
> --
> 2.9.3
>
--
Rafał
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
