On 22/01/17 18:32, Lorenzo Bianconi wrote:
> Add capability to route data ready signal on pin 1 or pin 2 of the package
>
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@xxxxxx>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.
Thanks,
Jonathan
> ---
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 59 +++++++++++++++++++++++++---
> 1 file changed, 53 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index f869dfa..c92ddcc 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -37,11 +37,14 @@
> #include <linux/iio/iio.h>
> #include <linux/iio/sysfs.h>
>
> +#include <linux/platform_data/st_sensors_pdata.h>
> +
> #include "st_lsm6dsx.h"
>
> #define ST_LSM6DSX_REG_ACC_DEC_MASK GENMASK(2, 0)
> #define ST_LSM6DSX_REG_GYRO_DEC_MASK GENMASK(5, 3)
> #define ST_LSM6DSX_REG_INT1_ADDR 0x0d
> +#define ST_LSM6DSX_REG_INT2_ADDR 0x0e
> #define ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK BIT(3)
> #define ST_LSM6DSX_REG_WHOAMI_ADDR 0x0f
> #define ST_LSM6DSX_REG_RESET_ADDR 0x12
> @@ -532,10 +535,56 @@ static const struct iio_info st_lsm6dsx_gyro_info = {
>
> static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0};
>
> +static int st_lsm6dsx_of_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin)
> +{
> + struct device_node *np = hw->dev->of_node;
> + int err;
> +
> + if (!np)
> + return -EINVAL;
> +
> + err = of_property_read_u32(np, "st,drdy-int-pin", drdy_pin);
> + if (err == -ENODATA) {
> + /* if the property has not been specified use default value */
> + *drdy_pin = 1;
> + err = 0;
> + }
> +
> + return err;
> +}
> +
> +static int st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw, u8 *drdy_reg)
> +{
> + int err = 0, drdy_pin;
> +
> + if (st_lsm6dsx_of_get_drdy_pin(hw, &drdy_pin) < 0) {
> + struct st_sensors_platform_data *pdata;
> + struct device *dev = hw->dev;
> +
> + pdata = (struct st_sensors_platform_data *)dev->platform_data;
> + drdy_pin = pdata ? pdata->drdy_int_pin : 1;
> + }
> +
> + switch (drdy_pin) {
> + case 1:
> + *drdy_reg = ST_LSM6DSX_REG_INT1_ADDR;
> + break;
> + case 2:
> + *drdy_reg = ST_LSM6DSX_REG_INT2_ADDR;
> + break;
> + default:
> + dev_err(hw->dev, "unsupported data ready pin\n");
> + err = -EINVAL;
> + break;
> + }
> +
> + return err;
> +}
> +
> static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
> {
> + u8 data, drdy_int_reg;
> int err;
> - u8 data;
>
> data = ST_LSM6DSX_REG_RESET_MASK;
> err = hw->tf->write(hw->dev, ST_LSM6DSX_REG_RESET_ADDR, sizeof(data),
> @@ -563,14 +612,12 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
> return err;
>
> /* enable FIFO watermak interrupt */
> - err = st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_INT1_ADDR,
> - ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK, 1);
> + err = st_lsm6dsx_get_drdy_reg(hw, &drdy_int_reg);
> if (err < 0)
> return err;
>
> - /* redirect INT2 on INT1 */
> - return st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_INT2_ON_INT1_ADDR,
> - ST_LSM6DSX_REG_INT2_ON_INT1_MASK, 1);
> + return st_lsm6dsx_write_with_mask(hw, drdy_int_reg,
> + ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK, 1);
> }
>
> static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
