The A64 MMC controllers need to set a "new timings" bit when a new rate is set. The actual meaning of that bit is not clear yet, but not setting it leads to some corner-case issues, like the CMD53 failing, which is used to implement SDIO packet aggregation. Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> Tested-by: Florian Vaussard <florian.vaussard@xxxxxxxxxx> --- drivers/mmc/host/sunxi-mmc.c | 6 ++++++ 1 file changed, 6 insertions(+), 0 deletions(-) diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c index b9c8a62bc212..51d6388a194e 100644 --- a/drivers/mmc/host/sunxi-mmc.c +++ b/drivers/mmc/host/sunxi-mmc.c @@ -253,6 +253,8 @@ struct sunxi_mmc_cfg { /* does the IP block support autocalibration? */ bool can_calibrate; + + bool needs_new_timings; }; struct sunxi_mmc_host { @@ -779,6 +781,9 @@ static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host, } mmc_writel(host, REG_CLKCR, rval); + if (host->cfg->needs_new_timings) + mmc_writel(host, REG_SD_NTSR, SDXC_2X_TIMING_MODE); + ret = sunxi_mmc_clk_set_phase(host, ios, rate); if (ret) return ret; @@ -1076,6 +1081,7 @@ static const struct sunxi_mmc_cfg sun50i_a64_cfg = { .idma_des_size_bits = 16, .clk_delays = NULL, .can_calibrate = true, + .needs_new_timings = true, }; static const struct of_device_id sunxi_mmc_of_match[] = { -- git-series 0.8.11 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html