Sorry for the noise, I forgot to Cc DT maintainers. This is a complete rewrite of the driver whose main purpose is to support the new DT representation where the NAND controller node is now really visible in the DT and appears under the EBI bus. With this new representation, we can add other devices under the EBI bus without risking pinmuxing conflicts (the NAND controller is under the EBI bus logic and as such, share some of its pins with other devices connected on this bus). Even though the goal of this rework was not necessarily to add new features, the new driver has been designed with this in mind. With a clearer separation between the different blocks and different IP revisions, adding new functionalities should be easier (we already have plans to support SMC timing configuration so that we no longer have to rely on the configuration done by the bootloader/bootstrap). Also note that we no longer have a custom ->cmdfunc() implementation, which means we can now benefit from new features added in the core implementation for free (support for new NAND operations for example). The last thing that we gain with this rework is support for multi-chips and multi-dies chips, thanks to the clean NAND controller <-> NAND devices representation. This new driver has been tested on several platforms (at91sam9261, at91sam9g45, at91sam9x5, sama5d3 and sama5d4) to make sure it did not introduce regressions, and it's worth mentioning that old bindings are still supported (which partly explain the positive diffstat). Here is a short description of the different patches: Patches 1 and 2 are adding new helpers functions respectively to the gpio and dmaengine subsystems. Note that I can put this code directly in my driver but I had the impression these would better fit in the dmaengine and gpio subsystem. Alexandre, Linus, Vinod, let me know if you think I should keep this code in my driver. Patch 3 is the bulk of the work. As said above, it's a complete rewrite of the existing driver, and patch 4 is documenting the new bindings. And finally, patch 5 is removing the chip->write_page() whose only user was the Atmel NAND driver. Wenyou, Nicolas, Josh, I'd really appreciate if you could review this series carefully (especially patch 3). Haarvard, Hans-Christian, I only compile-tested for avr32. Can you test it on a real platform? Thanks, Boris Boris Brezillon (5): gpio: Add the devm_get_index_gpiod_from_child() helper dmaengine: Provide a wrapper for memcpy operations mtd: nand: Cleanup/rework the atmel_nand driver mtd: nand: atmel: Document the new DT bindings mtd: nand: Remove unused chip->write_page() hook .../devicetree/bindings/mtd/atmel-nand.txt | 106 +- MAINTAINERS | 2 +- drivers/gpio/devres.c | 30 +- drivers/gpio/gpiolib.c | 9 +- drivers/mtd/nand/Makefile | 2 +- drivers/mtd/nand/atmel/Makefile | 4 + drivers/mtd/nand/atmel/nfc.c | 2168 +++++++++++++++++ drivers/mtd/nand/atmel/pmecc.c | 1011 ++++++++ drivers/mtd/nand/atmel/pmecc.h | 73 + drivers/mtd/nand/atmel_nand.c | 2479 -------------------- drivers/mtd/nand/atmel_nand_ecc.h | 163 -- drivers/mtd/nand/atmel_nand_nfc.h | 103 - drivers/mtd/nand/nand_base.c | 10 +- include/linux/dmaengine.h | 11 + include/linux/gpio/consumer.h | 15 +- include/linux/mtd/nand.h | 4 - 16 files changed, 3421 insertions(+), 2769 deletions(-) create mode 100644 drivers/mtd/nand/atmel/Makefile create mode 100644 drivers/mtd/nand/atmel/nfc.c create mode 100644 drivers/mtd/nand/atmel/pmecc.c create mode 100644 drivers/mtd/nand/atmel/pmecc.h delete mode 100644 drivers/mtd/nand/atmel_nand.c delete mode 100644 drivers/mtd/nand/atmel_nand_ecc.h delete mode 100644 drivers/mtd/nand/atmel_nand_nfc.h -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
