> > OK, but maybe we could keep the part about the mmcard for the eMMC to > emphasize that we need to setup this option for the controller. Right! > >>> + >>> +- no-1-8-v: >>> + Select this property when 1.8V signaling voltage supply is unavailable. >>> + When this property is enabled, both mmc-ddr-1_8v and mmc-hs400-1_8v should be >>> + cleared. >> >> Please don't use this sdhci property, unless really needed. > > Actually this is a mmc property, at least it is described in this the > mmc binding: > Documentation/devicetree/bindings/mmc/mmc.txt Yes, the documentation is wrong. It should we be moved into the docs for sdhci. I will send a patch updating it. Apologize for the misleading information. > > The description of this optional property is: > "no-1-8-v: when present, denotes that 1.8v card voltage is not supported on > this system, even if the controller claims it is." > > So as it is also part of the mmc binding we can remove it from our > bindings as we are going to do it for the other mmc property. Nope. > > But I am curious to know why do you think we could use it without any > need. Are you aware of some abuse of this property? Yes. > >> >> Perhaps you can elaborate exactly why it makes sense for your case. Or >> perhaps we already discussed this, in either case, please re-fresh my >> mind. > > For instance we need it now on the 7040DB board which does not have the > 1.8V signal voltage available. It it's better to describe what the controller/board support, instead of what it doesn't. I think you should be able to use other existing mmc DT bindings (perhaps also you need the brand new "mmc-ddr-3_3v"), instead of the "no-1-8-v". Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
