On Wed, 25 Jan 2017, Peter Griffin wrote:
> Hi Lee,
>
> On Tue, 24 Jan 2017, Lee Jones wrote:
>
> > Having just defined some new Pinctrl groups for when when HW flow-
> > control is {en,dis}abled, let's reference them for use within the
> > driver.
> >
> > Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
>
> Same as previous comment, your enabling hw flow control for all
> stih407 family boards. I've not checked the schematics for them
> but as hw flow control is dependent on board wiring, IMO this
> should be added in board specific file.
Fair shout.
On the B2120 UART0 is hooked up to the Smart Card Reader.
Will fix.
> > ---
> > arch/arm/boot/dts/stih407-family.dtsi | 5 +++--
> > 1 file changed, 3 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> > index c8b2944..9789978 100644
> > --- a/arch/arm/boot/dts/stih407-family.dtsi
> > +++ b/arch/arm/boot/dts/stih407-family.dtsi
> > @@ -222,8 +222,9 @@
> > compatible = "st,asc";
> > reg = <0x9830000 0x2c>;
> > interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&pinctrl_serial0>;
> > + pinctrl-names = "default", "manual-rts";
> > + pinctrl-0 = <&pinctrl_serial0_flowctrl>;
> > + pinctrl-1 = <&pinctrl_serial0>;
> > clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
> >
> > status = "disabled";
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
