Re: [PATCH 01/11] clk: sunxi-ng: mux: Fix determine_rate for mux clocks with pre-dividers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu, Jan 26, 2017 at 5:55 PM, Maxime Ripard
<maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> Hi Chen-Yu,
>
> On Tue, Jan 24, 2017 at 10:32:20AM +0800, Chen-Yu Tsai wrote:
>> The determine_rate helper used ccu_mux_helper_adjust_parent_for_prediv()
>> to adjust the parent_rate to account for pre-dividers, but then passed
>> the pristine parent clock rate from clk_hw_get_rate() to the round()
>> callback, thereby ignoring the pre-divider adjustment. In addition,
>> it was saving the adjusted parent rate back into struct
>> clk_rate_request.
>>
>> This patch fixes this by saving the pristine parent clock rate, and
>> adding a copy that is adjusted and passed to the round() callback.
>> The pristine copy, if it is the best solution, would be saved back
>> to struct clk_rate_request.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
>> ---
>>  drivers/clk/sunxi-ng/ccu_mux.c | 7 ++++---
>>  1 file changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/clk/sunxi-ng/ccu_mux.c b/drivers/clk/sunxi-ng/ccu_mux.c
>> index 858a48621631..3445041894e7 100644
>> --- a/drivers/clk/sunxi-ng/ccu_mux.c
>> +++ b/drivers/clk/sunxi-ng/ccu_mux.c
>> @@ -71,7 +71,7 @@ int ccu_mux_helper_determine_rate(struct ccu_common *common,
>>       unsigned int i;
>>
>>       for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
>> -             unsigned long tmp_rate, parent_rate;
>> +             unsigned long tmp_rate, parent_rate, adj_parent_rate;
>>               struct clk_hw *parent;
>>
>>               parent = clk_hw_get_parent_by_index(hw, i);
>> @@ -79,10 +79,11 @@ int ccu_mux_helper_determine_rate(struct ccu_common *common,
>>                       continue;
>>
>>               parent_rate = clk_hw_get_rate(parent);
>> +             adj_parent_rate = parent_rate;
>>               ccu_mux_helper_adjust_parent_for_prediv(common, cm, i,
>> -                                                     &parent_rate);
>> +                                                     &adj_parent_rate);
>>
>> -             tmp_rate = round(cm, clk_hw_get_rate(parent), req->rate, data);
>> +             tmp_rate = round(cm, parent_rate, req->rate, data);
>
> Shouldn't you use the adjusted rate here too?

You're right. Thanks!

ChenYu
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux