Re: [PATCH V2 1/2] dt-bindings: leds: document new led-triggers property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 01/25/2017 10:18 AM, Rafał Miłecki wrote:
> On 01/23/2017 09:51 PM, Jacek Anaszewski wrote:
>> On 01/23/2017 05:45 PM, Rob Herring wrote:
>>> On Fri, Jan 20, 2017 at 11:35:20PM +0100, Jacek Anaszewski wrote:
>>>> Hi Rafał,
>>>>
>>>> On 01/20/2017 10:56 PM, Rafał Miłecki wrote:
>>>>> From: Rafał Miłecki <rafal@xxxxxxxxxx>
>>>>>
>>>>> Some LEDs can be related to particular devices described in DT. This
>>>>> property allows specifying such relations. E.g. USB LED should usually
>>>>> be used to indicate some USB port(s) state.
>>>>>
>>>>> Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
>>>>> ---
>>>>> V2: Replace "usb-ports" with "led-triggers" property which is more
>>>>> generic and
>>>>>     allows specifying other devices as well.
>>>>>
>>>>> When bindings patch is related to some followup implementation,
>>>>> they usually go
>>>>> through the same tree.
>>>>>
>>>>> Greg: this patch is based on top of e64b8cc72bf9 ("DT: leds:
>>>>> Improve examples by
>>>>> adding some context") from kernel/git/j.anaszewski/linux-leds.git .
>>>>> Is there any
>>>>> way to solve this dependency issue? Or should this patch wait until
>>>>> 3.11 is
>>>>> released?
>>>>> ---
>>>>>  Documentation/devicetree/bindings/leds/common.txt | 16
>>>>> ++++++++++++++++
>>>>>  1 file changed, 16 insertions(+)
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/leds/common.txt
>>>>> b/Documentation/devicetree/bindings/leds/common.txt
>>>>> index 24b656014089..17632a041196 100644
>>>>> --- a/Documentation/devicetree/bindings/leds/common.txt
>>>>> +++ b/Documentation/devicetree/bindings/leds/common.txt
>>>>> @@ -49,6 +49,17 @@ Optional properties for child nodes:
>>>>>  - panic-indicator : This property specifies that the LED should be
>>>>> used,
>>>>>              if at all possible, as a panic indicator.
>>>>>
>>>>> +- led-triggers : List of devices that should trigger this LED
>>>>> activity. Some
>>>>> +         LEDs can be related to a specific device and should somehow
>>>>> +         indicate its state. E.g. USB 2.0 LED may react to
>>>>> device(s) in
>>>>> +         a USB 2.0 port(s). Another common example is switch or
>>>>> router
>>>>> +         with multiple Ethernet ports each of them having its own LED
>>>>> +         assigned (assuminled-trigger-usbportg they are not
>>>>> hardwired).
>>>>> +         In such cases this property should contain phandle(s) of
>>>>> +         related device(s). In many cases LED can be related to more
>>>>> +         than one device (e.g. one USB LED vs. multiple USB ports)
>>>>> so a
>>>>> +         list of entries can be specified.
>>>>> +
>>>>
>>>> This implies that it is possible to define multiple triggers for
>>>> a LED class device but it is not supported by LED Trigger core.
>>>
>>> Not really relevant for designing (and future proofing) a binding.
>>
>> But relevant for LED Trigger ABI, which would have to be changed to
>> support the semantics in this form. I think that changing the property
>> name to linux,trigger-sources would make its purpose more clear.
>>
>> Note that we have to also associate somehow this property with the
>> triggers that will make use of the information it provides. I can
>> imagine also other compound triggers that could benefit on it.
>>
>> What follows, the trigger sources would trigger LED activity only
>> if the LED class device was assigned appropriate trigger. We need to
>> define somewhere which triggers support this property.
>>
>> Trigger specific bindings?
> 
> Maybe this is something I'm missing. Why adding this "led-triggers"
> property
> would mean/require ABI breakage?

As I explained in the other message, LED Triggers are drivers registered
in the LED Trigger core. LED subsystem allows for only one active
trigger at a time (triggers sysfs file reports selected trigger by
wrapping its name with square brackets on the space separated list
of all available LED Triggers).

The problem is in the property name, which can easily lead to wrong
conclusions for the reader not familiar with the LED Trigger core
design.

> AFAIU adding support for "led-triggers" to the "usbport" trigger driver
> (see
> patch 2/2) didn't break anything, I hope?
> 

No, it didn't, but ambiguity in the documentation can lead to
misunderstanding and hinder learning LED subsystem API.

-- 
Best regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux