On Fri, Dec 13, 2013 at 04:57:04PM +0800, Xiubo Li wrote: [...] > diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile > index 8b754e4..9029a12 100644 > --- a/drivers/pwm/Makefile > +++ b/drivers/pwm/Makefile > @@ -5,6 +5,7 @@ obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o > obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o > obj-$(CONFIG_PWM_EP93XX) += pwm-ep93xx.o > obj-$(CONFIG_PWM_IMX) += pwm-imx.o > +obj-$(CONFIG_PWM_FSL_FTM) += pwm-fsl-ftm.o This needs to move up one line to preserve the alphabetical ordering. > diff --git a/drivers/pwm/pwm-fsl-ftm.c b/drivers/pwm/pwm-fsl-ftm.c [...] > +struct fsl_pwm_chip { [...] > + int big_endian; This should be of type bool. > +}; > + > +static inline u32 fsl_pwm_readl(struct fsl_pwm_chip *fpc, > + const void __iomem *addr) > +{ > + u32 val; > + > + val = __raw_readl(addr); > + > + if (likely(fpc->big_endian)) The likely() probably isn't very useful in this case. But if you want to keep it, it should at least be reversed, since little-endian is actually the default (you have to specify the big-endian property to activate the big endian mode). > + val = be32_to_cpu(val); > + else > + val = le32_to_cpu(val); > + rmb(); I'd prefer the rmb() to follow the __raw_readl() immediately to make the relationship more explicit. > + > + return val; > +} > + > +static inline void fsl_pwm_writel(struct fsl_pwm_chip *fpc, > + u32 val, void __iomem *addr) > +{ > + wmb(); > + if (likely(fpc->big_endian)) > + val = cpu_to_be32(val); > + else > + val = cpu_to_le32(val); > + > + __raw_writel(val, addr); Same here. wmb() should precede __raw_writel() immediately. > +static inline int fsl_pwm_calculate_default_ps(struct fsl_pwm_chip *fpc, > + int index) Please align arguments on subsequent lines with the first argument on the first line. There are a few more of those in this file, please check all other functions as well. Also I think it's better to turn the FSL_PWM_CLK_* enum into a named enum and reuse the type here. That way you get proper type-checking. > + switch (index) { [...] > + default: > + return -EINVAL; And with proper type checking you don't need this default case anymore. > +static unsigned long fsl_pwm_calculate_period_cycles(struct fsl_pwm_chip *fpc, > + unsigned long period_ns, int index) > +{ > + int ret; > + unsigned long cycles; > + > + fpc->counter_clk_select = FTM_SC_CLK(index); > + > + ret = fsl_pwm_calculate_default_ps(fpc, index); > + if (ret) { > + dev_err(fpc->chip.dev, "failed to calculate default ps.\n"); No need for the terminating fullstop (.) here, but perhaps you could write out what "ps" actually stands for. Also including the error code in the error message would be good since you're not propagating the error to the caller. > + cycles = fsl_pwm_calculate_cycles(fpc, period_ns); > + > + return cycles; This can simply be "return fsl_pwm_calculate_cycles(fpc, period_ns);", in which case you can get rid of the cycles variable. > +static unsigned long fsl_pwm_calculate_period(struct fsl_pwm_chip *fpc, > + unsigned long period_ns) > +{ [...] > + if (fix_rate > ext_rate) { > + m0 = FSL_PWM_CLK_FIX; > + m1 = FSL_PWM_CLK_EXT; > + } else { > + m0 = FSL_PWM_CLK_EXT; > + m1 = FSL_PWM_CLK_FIX; > + > + } There's a gratuitous blank line above this one. > +static int fsl_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, > + int duty_ns, int period_ns) > +{ > + u32 val, period, duty; > + struct fsl_pwm_chip *fpc = to_fsl_chip(chip); > + > + mutex_lock(&fpc->lock); > + if (fpc->period_ns && fpc->period_ns != period_ns) { There should be a blank line between the above two. > + dev_err(fpc->chip.dev, "fail to config pwm%d, the period " > + "time should be the same with the current " > + "running pwm(s).\n", pwm->hwpwm); I think I'd make this error message more terse and put more information into a comment. Perhaps something like this: /* * The FSL FTM controller supports only a single period for all PWM * channels, therefore incompatible changes need to be refused. */ if (fpc->period_ns && fpc->period_ns != period_ns) { dev_err(fpc->chip.dev, "conflicting period requested for PWM %u\n", pwm->hwpwm); ... } > + mutex_unlock(&fpc->lock); > + return -EINVAL; I think something like -EBUSY would be more appropriate here. > + if (!fpc->period_ns && duty_ns) { > + period = fsl_pwm_calculate_period(fpc, period_ns); > + if (!period) { > + dev_err(fpc->chip.dev, "fail to calculate the " "failed" > + "period cycles.\n"); And no fullstop either. Also I don't think you need "cycles" here. In fact something equally accurate like this: dev_err(fpc->chip.dev, "failed to calculate period\n"); Still fits within 80 characters. > + fpc->period_ns = period_ns; > + } > + mutex_unlock(&fpc->lock); This could use a blank line as well. > +static int fsl_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, > + enum pwm_polarity polarity) > +{ > + u32 val; > + struct fsl_pwm_chip *fpc = to_fsl_chip(chip); > + > + val = fsl_pwm_readl(fpc, fpc->base + FTM_POL); > + if (polarity == PWM_POLARITY_INVERSED) Blank line between the above. > + val |= BIT(pwm->hwpwm); > + else > + val &= ~BIT(pwm->hwpwm); > + fsl_pwm_writel(fpc, val, fpc->base + FTM_POL); And here. > +static void fsl_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) > +{ > + u32 val; > + struct fsl_pwm_chip *fpc = to_fsl_chip(chip); > + > + val = fsl_pwm_readl(fpc, fpc->base + FTM_OUTMASK); > + val |= BIT(pwm->hwpwm); > + fsl_pwm_writel(fpc, val, fpc->base + FTM_OUTMASK); > + > + mutex_lock(&fpc->lock); > + fsl_counter_clock_disable(fpc); > + > + val = fsl_pwm_readl(fpc, fpc->base + FTM_OUTMASK); > + if ((val & 0xFF) == 0xFF) { > + fpc->period_ns = 0; > + fpc->counter_clk_en = NULL; > + } > + mutex_unlock(&fpc->lock); Same here. > +static int fsl_pwm_probe(struct platform_device *pdev) > +{ > + int ret; > + struct fsl_pwm_chip *fpc; > + struct resource *res; > + struct device_node *np = pdev->dev.of_node; > + > + fpc = devm_kzalloc(&pdev->dev, sizeof(*fpc), GFP_KERNEL); > + if (!fpc) > + return -ENOMEM; > + > + mutex_init(&fpc->lock); > + > + fpc->chip.dev = &pdev->dev; > + > + fpc->big_endian = of_property_read_bool(np, "big-endian"); > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + fpc->base = devm_ioremap_resource(&pdev->dev, res); > + if (IS_ERR(fpc->base)) > + return PTR_ERR(fpc->base); > + > + fpc->sys_clk = devm_clk_get(fpc->chip.dev, "ftm_sys"); For consistency I'd use &pdev->dev here... > + if (IS_ERR(fpc->sys_clk)) { > + dev_err(fpc->chip.dev, ... and here. > + ret = pwmchip_add(&fpc->chip); > + if (ret < 0) { > + dev_err(&pdev->dev, "failed to add PWM chip %d\n", ret); Perhaps "failed to add PWM chip: %d\n", so that %d isn't confused to mean the PWM chip number? > +static int fsl_pwm_remove(struct platform_device *pdev) > +{ > + struct fsl_pwm_chip *fpc = platform_get_drvdata(pdev); > + > + mutex_destroy(&fpc->lock); I think you can drop this. Once fsl_pwm_remove() exists, the memory pointed to by fpc will be freed, so you won't be able to access the mutex anyway. Thierry
Attachment:
pgpr54HfprPQA.pgp
Description: PGP signature