The DMM/Tiler block can used by omapdrm to allocate frame buffers. With the removal of address and irq data from the omap4 hwmods, the probe of DMM driver fails and omapdrm isn't able to utilize the DMM hardware. Add DMM bindings for OMAP4 and OMAP5 and DRA7x. Changes in v5: - Use of_match_ptr() in the dmm driver. - Add DT node for DRA7x as dra7.dtsi is now in mainline. Changes in v4: - Clean up documentation further. Changes in v3: - Fix mistakes in documentation and remove aliases for dmm nodes. Changes in v2: - No changes, split out into a separate series containing only DT related parts. Archit Taneja (2): arm: dts: omap4+: Add DMM bindings drm: omap: Enable DT support for DMM Documentation/devicetree/bindings/arm/omap/dmm.txt | 22 ++++++++++++++++++++++ arch/arm/boot/dts/dra7.dtsi | 7 +++++++ arch/arm/boot/dts/omap4.dtsi | 7 +++++++ arch/arm/boot/dts/omap5.dtsi | 7 +++++++ drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 7 +++++++ 5 files changed, 50 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/omap/dmm.txt -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
