We are moving towards handling GPIO pinmux settings that don't require
extra bias or drive strength settings to use the GPIO bindings only.
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
arch/arm/boot/dts/sun8i-a23-q8-tablet.dts | 10 ----------
drivers/clk/sunxi-ng/ccu-sun9i-a80.c | 24 ++++++++++++------------
2 files changed, 12 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
index 3ab5c0c09d93..b6958e8f2f01 100644
--- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
+++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
@@ -50,7 +50,6 @@
};
&codec {
- pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
allwinner,audio-routing =
"Headphone", "HP",
@@ -62,12 +61,3 @@
"Headset Mic", "HBIAS";
status = "okay";
};
-
-&pio {
- codec_pa_pin: codec_pa_pin@0 {
- allwinner,pins = "PH9";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-};
diff --git a/drivers/clk/sunxi-ng/ccu-sun9i-a80.c b/drivers/clk/sunxi-ng/ccu-sun9i-a80.c
index 5626e4674f48..e13e313ce4f5 100644
--- a/drivers/clk/sunxi-ng/ccu-sun9i-a80.c
+++ b/drivers/clk/sunxi-ng/ccu-sun9i-a80.c
@@ -42,7 +42,7 @@ static struct clk_div_table pll_cpux_p_div_table[] = {
static struct ccu_nm pll_c0cpux_clk = {
.enable = BIT(31),
.lock = BIT(0),
- .n = _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV_TABLE(16, 1, pll_cpux_p_div_table),
.common = {
.reg = 0x000,
@@ -56,7 +56,7 @@ static struct ccu_nm pll_c0cpux_clk = {
static struct ccu_nm pll_c1cpux_clk = {
.enable = BIT(31),
.lock = BIT(1),
- .n = _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV_TABLE(16, 1, pll_cpux_p_div_table),
.common = {
.reg = 0x004,
@@ -78,7 +78,7 @@ static struct ccu_nm pll_c1cpux_clk = {
static struct ccu_nm pll_audio_clk = {
.enable = BIT(31),
.lock = BIT(2),
- .n = _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV_OFFSET(0, 6, 0),
.common = {
.reg = 0x008,
@@ -93,7 +93,7 @@ static struct ccu_nm pll_audio_clk = {
static struct ccu_nkmp pll_periph0_clk = {
.enable = BIT(31),
.lock = BIT(3),
- .n = _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV(16, 1), /* input divider */
.p = _SUNXI_CCU_DIV(18, 1), /* output divider */
.common = {
@@ -109,7 +109,7 @@ static struct ccu_nkmp pll_periph0_clk = {
static struct ccu_nkmp pll_ve_clk = {
.enable = BIT(31),
.lock = BIT(4),
- .n = _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV(16, 1), /* input divider */
.p = _SUNXI_CCU_DIV(18, 1), /* output divider */
.common = {
@@ -125,7 +125,7 @@ static struct ccu_nkmp pll_ve_clk = {
static struct ccu_nkmp pll_ddr_clk = {
.enable = BIT(31),
.lock = BIT(5),
- .n = _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV(16, 1), /* input divider */
.p = _SUNXI_CCU_DIV(18, 1), /* output divider */
.common = {
@@ -141,7 +141,7 @@ static struct ccu_nkmp pll_ddr_clk = {
static struct ccu_nm pll_video0_clk = {
.enable = BIT(31),
.lock = BIT(6),
- .n = _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV(16, 1), /* input divider */
.common = {
.reg = 0x018,
@@ -156,7 +156,7 @@ static struct ccu_nm pll_video0_clk = {
static struct ccu_nkmp pll_video1_clk = {
.enable = BIT(31),
.lock = BIT(7),
- .n = _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV(16, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 2), /* external divider p */
.common = {
@@ -172,7 +172,7 @@ static struct ccu_nkmp pll_video1_clk = {
static struct ccu_nkmp pll_gpu_clk = {
.enable = BIT(31),
.lock = BIT(8),
- .n = _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV(16, 1), /* input divider */
.p = _SUNXI_CCU_DIV(18, 1), /* output divider */
.common = {
@@ -188,7 +188,7 @@ static struct ccu_nkmp pll_gpu_clk = {
static struct ccu_nkmp pll_de_clk = {
.enable = BIT(31),
.lock = BIT(9),
- .n = _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV(16, 1), /* input divider */
.p = _SUNXI_CCU_DIV(18, 1), /* output divider */
.common = {
@@ -204,7 +204,7 @@ static struct ccu_nkmp pll_de_clk = {
static struct ccu_nkmp pll_isp_clk = {
.enable = BIT(31),
.lock = BIT(10),
- .n = _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV(16, 1), /* input divider */
.p = _SUNXI_CCU_DIV(18, 1), /* output divider */
.common = {
@@ -220,7 +220,7 @@ static struct ccu_nkmp pll_isp_clk = {
static struct ccu_nkmp pll_periph1_clk = {
.enable = BIT(31),
.lock = BIT(11),
- .n = _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV(16, 1), /* input divider */
.p = _SUNXI_CCU_DIV(18, 1), /* output divider */
.common = {
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
