On Mon, Jan 23, 2017 at 11:10 AM, Kevin Hilman <khilman@xxxxxxxxxxxx> wrote: > Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> writes: > >> This adds support for the pwm_ao_b pin. Unfortunately the registers for >> the pwm_ao pins are not documented at all. The source for the pwm_ao_b >> pin from this patch is the Khadas VIM GPL kernel source, which sets bit >> 3 and unsets bits 4 and 31 to enable the PWM LEDs. >> >> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> >> --- >> drivers/pinctrl/meson/pinctrl-meson-gxl.c | 8 ++++++++ >> 1 file changed, 8 insertions(+) >> >> diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c >> index 25694f7094c7..6ff321a7366d 100644 >> --- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c >> +++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c >> @@ -222,6 +222,8 @@ static const unsigned int uart_rts_ao_b_pins[] = { PIN(GPIOAO_3, 0) }; >> >> static const unsigned int remote_input_ao_pins[] = {PIN(GPIOAO_7, 0) }; >> >> +static const unsigned int pwm_ao_b_pins[] = { PIN(GPIOAO_9, 0) }; >> + > > Hmm, the S905 public data sheet[1] shows this as GPIOAO_13. > gack, nevermind. I see now this is for GXL, not GXBB. Ignore my comments. Linus, feel free to apply with: Acked-by: Kevin Hilman <khilman@xxxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html