Am 22.01.2017 um 23:22 schrieb Michael Heimpold: > This series updates/adds Device Tree support for I2SE's Duckbill > device family. > > The Duckbill devices are small, pen-drive sized boards based on > NXP's i.MX28 SoC. While the initial variants (Duckbill series) were > equipped with a micro SD card slot only, the latest generation > (Duckbill 2 series) have an additional internal eMMC onboard. > > Both device generations consists of four "family members": > > - Duckbill/Duckbill 2: generic board, intended to be used as > baseboard for custom designs and/or as development board > > - Duckbill EnOcean/Duckbill 2 EnOcean: come with an EnOcean > daugther board equipped with the popular TCM310 module > > - Duckbill 485/Duckbill 2 485: as the name implies, these > devices are intended to be used as Ethernet - RS485 converters > > - Duckbill SPI/Duckbill 2 SPI: not sold separately, but used > in I2SE's development kits for Green PHY HomePlug Powerline > communication > > Because the Duckbill series is EOL, this patch series only adds > support for the latest Duckbill 2 series devices. However, > support for the generic Duckbill board was already mainline, > so update it to match vendor tree DT. Acked-by: Stefan Wahren <stefan.wahren@xxxxxxxx> for patches 1,2,3,5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html