From: Patrick Bruenn <p.bruenn@xxxxxxxxxxxx>
The pinmux configuration in device tree is different from manual
muxing in <u-boot>/board/freescale/mx53loco/mx53loco.c
It seems the device tree configuration is never used by any kernel
driver and the correct setting, preconfigured by u-boot, was never
overwritten. So this issue never showed up anywhere.
---
I stumbled upon this difference, while adding the imx53 based CX9020
Embedded PC to u-boot bootloader. "New" boards are encouraged to use
device tree for pinmuxing in u-boot, so I tried to reuse
imx53-qsb-common.dtsi for that. That failed with a high packet loss on
the fec_mxc device. With the attached patch that device tree based
pinmuxing seems successful in u-boot. My suggestion is to apply it to
imx53-qsb-common.dtsi, too. That will help other "late adopters" and
prevent similar issues, in case any kernel driver starts using this
pinmux configurations.
Signed-off-by: Patrick Bruenn <p.bruenn@xxxxxxxxxxxx>
---
arch/arm/boot/dts/imx53-qsb-common.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index c05e7cfd0cbc..40b3e31935d0 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -215,16 +215,16 @@
pinctrl_fec: fecgrp {
fsl,pins = <
- MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
- MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
- MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
- MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
- MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
- MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
- MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
- MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
- MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
- MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
+ MX53_PAD_FEC_MDC__FEC_MDC 0x4
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4
>;
};
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
