Add decriptions about supported chips, including MT2701 & MT8173 Signed-off-by: YT Shen <yt.shen@xxxxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> --- Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt | 2 ++ Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt | 2 ++ 2 files changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt index db6e77e..acf61f1 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt @@ -40,6 +40,7 @@ Required properties (all function blocks): "mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt "mediatek,<chip>-disp-mutex" - display mutex "mediatek,<chip>-disp-od" - overdrive + the supported chips are mt2701 and mt8173. - reg: Physical base address and length of the function block register space - interrupts: The interrupt signal from the function block (required, except for merge and split function blocks). @@ -54,6 +55,7 @@ Required properties (DMA function blocks): "mediatek,<chip>-disp-ovl" "mediatek,<chip>-disp-rdma" "mediatek,<chip>-disp-wdma" + the supported chips are mt2701 and mt8173. - larb: Should contain a phandle pointing to the local arbiter device as defined in Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt - iommus: Should point to the respective IOMMU block with master port as diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt index 2b1585a..fadf327 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt @@ -7,6 +7,7 @@ channel output. Required properties: - compatible: "mediatek,<chip>-dsi" + the supported chips are mt2701 and mt8173. - reg: Physical base address and length of the controller's registers - interrupts: The interrupt signal from the function block. - clocks: device clocks @@ -25,6 +26,7 @@ The MIPI TX configuration module controls the MIPI D-PHY. Required properties: - compatible: "mediatek,<chip>-mipi-tx" + the supported chips are mt2701 and mt8173. - reg: Physical base address and length of the controller's registers - clocks: PLL reference clock - clock-output-names: name of the output clock line to the DSI encoder -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
