On Fri, Dec 02, 2016 at 03:37:22PM +0100, christopher.spinrath@xxxxxxxxxxxxxx wrote: > From: Christopher Spinrath <christopher.spinrath@xxxxxxxxxxxxxx> > > Apart from the already enabled Designware HDMI port, the Utilite Pro > has a second display pipeline which has the following shape: > > IPU1 DI0 --> Parallel display --> tfp410 rgb24 to DVI encoder > --> HDMI connector. > Enable support for it. > > In addition, since this pipeline is hardwired to IPU1, sever the link > between IPU1 and the SoC-internal Designware HDMI encoder forcing the > latter to be connected to IPU2 instead of IPU1. Otherwise, it is not > possible to drive both displays at high resolution due to the bandwidth > limitations of a single IPU. > > Signed-off-by: Christopher Spinrath <christopher.spinrath@xxxxxxxxxxxxxx> Applied, thanks. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
