On 22/01/17 10:30, Lorenzo Bianconi wrote: > Add st,drdy-int-pin property to select interrupt pin of the package > > Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@xxxxxx> Looks good and lines up with existing st-sensors binding. > --- > Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > index ed3cdac..cf81afd 100644 > --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > @@ -7,6 +7,8 @@ Required properties: > - reg: i2c address of the sensor / spi cs line > > Optional properties: > +- st,drdy-int-pin: the pin on the package that will be used to signal > + "data ready" (valid values: 1 or 2). > - interrupt-parent: should be the phandle for the interrupt controller > - interrupts: interrupt mapping for IRQ. It should be configured with > flags IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING. > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
