On 20/01/17 05:40, Matt Ranostay wrote: > Cc: devicetree@xxxxxxxxxxxxxxx > Signed-off-by: Matt Ranostay <matt@ranostay.consulting> > --- > .../devicetree/bindings/iio/health/max30102.txt | 30 ++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/health/max30102.txt > > diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt > new file mode 100644 > index 000000000000..c93d1bb25597 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/health/max30102.txt > @@ -0,0 +1,30 @@ > +Maxim MAX30102 heart rate and pulse oximeter sensor > + > +* https://datasheets.maximintegrated.com/en/ds/MAX30102.pdf > + > +Required properties: > + - compatible: must be "maxim,max30102" > + - reg: the I2C address of the sensor > + - interrupt-parent: should be the phandle for the interrupt controller > + - interrupts: the sole interrupt generated by the device > + > + Refer to interrupt-controller/interrupts.txt for generic > + interrupt client node bindings. > + > +Optional properties: > + - maxim,red-led-current-microamp: configuration for RED LED current > + - maxim,ir-led-current-microamp: configuration for IR LED current > + > + Note that each step is approximately 200 microamps, ranging from 0 uA to > + 50800 uA. Are these due to the hardware present, or are we looking at something that should be controllable from userspace? > + > +Example: > + > +max30100@57 { > + compatible = "maxim,max30102"; > + reg = <57>; > + maxim,red-led-current-microamp = <7000>; > + maxim,ir-led-current-microamp = <7000>; > + interrupt-parent = <&gpio1>; > + interrupts = <16 2>; > +}; > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
