Looks good to me. Philipp, just let me know if this is ready for merging, or you can make a pull request for Mauro yourself if you prefer. Regards, Hans On 01/20/2017 03:00 PM, Michael Tretter wrote: > Hello, > > This is v4 of a patch series that adds support for the Video Data Order > Adapter (VDOA) that can be found on Freescale i.MX6. It converts the > macroblock tiled format produced by the CODA 960 video decoder to a > raster-ordered format for scanout. > > Changes since v3: > > - Patch 2/7: Add my copyright to vdoa copyright header > - Patch 2/7: Fix offset of chroma plane to be page-aligned > - Patch 6/7: Fix oops when releasing the coda driver by destroying vdoa > context after removing all buffers > - Patch 6/7: Fix missing vdoa disable when switching from tiled to linear > format > > Changes since v2: > > - Patch 1/7: Update commit message to include binding change; fix > spelling/style in binding documentation > > Changes since v1: > > - Dropped patch 8/9 of v1 > - Patch 1/7: Add devicetree binding documentation for fsl-vdoa > - Patch 6/7: I merged patch 5/9 and patch 8/9 of v1 into a single patch > - Patch 6/7: Use dt compatible instead of a phandle to find VDOA device > - Patch 6/7: Always check VDOA availability even if disabled via module > parameter and do not print a message if VDOA cannot be found > - Patch 6/7: Do not change the CODA context in coda_try_fmt() > - Patch 6/7: Allocate an additional internal frame if the VDOA is in use > > Michael Tretter (3): > [media] coda: fix frame index to returned error > [media] coda: use VDOA for un-tiling custom macroblock format > [media] coda: support YUYV output if VDOA is used > > Philipp Zabel (4): > [media] dt-bindings: Add a binding for Video Data Order Adapter > [media] coda: add i.MX6 VDOA driver > [media] coda: correctly set capture compose rectangle > [media] coda: add debug output about tiling > > .../devicetree/bindings/media/fsl-vdoa.txt | 21 ++ > arch/arm/boot/dts/imx6qdl.dtsi | 2 + > drivers/media/platform/Kconfig | 3 + > drivers/media/platform/coda/Makefile | 1 + > drivers/media/platform/coda/coda-bit.c | 93 ++++-- > drivers/media/platform/coda/coda-common.c | 175 ++++++++++- > drivers/media/platform/coda/coda.h | 3 + > drivers/media/platform/coda/imx-vdoa.c | 338 +++++++++++++++++++++ > drivers/media/platform/coda/imx-vdoa.h | 58 ++++ > 9 files changed, 652 insertions(+), 42 deletions(-) > create mode 100644 Documentation/devicetree/bindings/media/fsl-vdoa.txt > create mode 100644 drivers/media/platform/coda/imx-vdoa.c > create mode 100644 drivers/media/platform/coda/imx-vdoa.h > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
