Re: [PATCH v5] ARM64: dts: meson-gx: Add firmware reserved memory zones

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Am 19.01.2017 um 05:36 schrieb Kevin Hilman:
> Andreas Färber <afaerber@xxxxxxx> writes:
>> Am 19.01.2017 um 01:20 schrieb Andreas Färber:
>>> Am 18.01.2017 um 17:50 schrieb Neil Armstrong:
>>>> The Amlogic Meson GXBB/GXL/GXM secure monitor uses part of the memory space,
>>>> this patch adds these reserved zones.
>>>>
>>>> Without such reserved memory zones, running the following stress command :
>>>> $ stress-ng --vm 16 --vm-bytes 128M --timeout 10s
>>>> multiple times:
>>>>
>>>> Could lead to the following kernel crashes :
>>>> [   46.937975] Bad mode in Error handler detected on CPU1, code 0xbf000000 -- SError
>>>> ...
>>>> [   47.058536] Internal error: Attempting to execute userspace memory: 8600000f [#3] PREEMPT SMP
>>>> ...
>>>> Instead of the OOM killer.
>>>>
>>>
>>> I miss a Fixes: or Cc: here for the backport you desired. To have it
>>> fixed back to my very introduction:
>>>
>>> Fixes: 4f24eda8401f ("ARM64: dts: Prepare configs for Amlogic Meson GXBaby")
>>>
>>> People backporting it would need to handle the meson-{gx => gxbb}.dtsi
>>> transition for 4.9 down to 4.6, which seems fairly straightforward.
>>>
>>>> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
>>>> ---
>>>>  arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 18 ++++++++++++++++++
>>>>  1 file changed, 18 insertions(+)
>>>>
>>>> Changes since v4 at [5]:
>>>> - Move start of ddr memory to reserved-memory node
>>>> - Drop memory node move
>>>> - Fix typo in sizes
>>>>
>>>> Changes since resent v2 at [4]:
>>>> - Fix invalid comment of useable memory attributes
>>>>
>>>> Changes since original v2 at [3]:
>>>> - Typo in commit 2GiB -> 1GiB, 4GiB -> 2GiB
>>>>
>>>> Changes since v2 at [2]:
>>>> - Moved all memory node out of dtsi
>>>> - Added comment about useable memory
>>>> - Fixed comment about secmon reserved zone
>>>>
>>>> Changes since v1 at [1] :
>>>> - Renamed reg into linux,usable-memory to ovveride u-boot memory
>>>> - only kept secmon memory zone
>>>>
>>>> [1] http://lkml.kernel.org/r/20161212101801.28491-1-narmstrong@xxxxxxxxxxxx
>>>> [2] http://lkml.kernel.org/r/1483105232-6242-1-git-send-email-narmstrong@xxxxxxxxxxxx
>>>> [3] http://lkml.kernel.org/r/1484128128-22454-1-git-send-email-narmstrong@xxxxxxxxxxxx
>>>> [4] http://lkml.kernel.org/r/1484128540-22662-1-git-send-email-narmstrong@xxxxxxxxxxxx
>>>> [5] http://lkml.kernel.org/r/1484129414-23325-1-git-send-email-narmstrong@xxxxxxxxxxxx
>>>>
>>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>>>> index eada0b5..63d52b7 100644
>>>> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>>>> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>>>> @@ -55,6 +55,24 @@
>>>>  	#address-cells = <2>;
>>>>  	#size-cells = <2>;
>>>>  
>>>> +	reserved-memory {
>>>> +		#address-cells = <2>;
>>>> +		#size-cells = <2>;
>>>> +		ranges;
>>>> +
>>>> +		/* 16 MiB reserved for Hardware ROM Firmware */
>>>> +		hwrom: hwrom {
>>>
>>> Both sub-nodes get a label that is unused, but reserved-memory itself
>>> does not (my v4 remark). Intentional?
>>>
>>>> +			reg = <0x0 0x0 0x0 0x1000000>;
>>>> +			no-map;
>>>> +		};
>>>> +
>>>> +		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
>>>> +		secmon: secmon {
>>>
>>> I note that this .dtsi further down has a node /firmware/secure-monitor
>>> with label sm.
>>> a) Is there any naming convention such as secmon_mem to adopt here to
>>> avoid mixups with sm?
>>> b) Should this secmon node be referenced in the secure-monitor node via
>>> memory-node = <&secmon>; to model their connection, thereby giving the
>>> label a use? Or should we maybe merge the two nodes by moving the
>>> compatible string here?
>>>
>>> https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/tree/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
>>
>> Answering my own question: the example labels use _reserved suffix.
>>
>>>> +			reg = <0x0 0x10000000 0x0 0x200000>;
>>
>> And since we use a reg property here, the node name should get a unit
>> address to avoid future dtc warnings/errors. Ditto for hwrom.
> 
> OK, I added Fixes:, your Reviewed-by, added the _reserved suffix and
> unit address and applied to v4.10/fixes.
> 
> Update patch below for reference.

Perfect, more than I expected.

Thanks,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux